Help. I messed up my CAS3 Eeprom · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

Eric
53.2% (Neutral)
Newbie Topic Starter

2024-03-12T08:34:51Z

Hi,

Updating the CAS3 via OBD went wrong. Now the car is completely dead, no lights on the dash. I managed to extract the eeprom via Hexprog (flash is ok now thanks to @Sixcode).
I hope someone can take a look at it, it's probably corrupted. I appreciate it very much..
Thank you..

I tried to update from 9226238 to 9395657

CAS3_EEPROM_PV91773.zip You have insufficient rights to see the content.

Edited by user 2024-03-12T10:47:22Z | Reason: Not specified

Sponsor

Start Ecu Tuning today with Hexprog II Basic Set, all from an incredible price: ONLY USD 575.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

sixcode
100% (Exalted)
Advanced Member

2024-03-13T08:41:41Z

Originally Posted by: Eric

Hi,

Updating the CAS3 via OBD went wrong. Now the car is completely dead, no lights on the dash. I managed to extract the eeprom via Hexprog (flash is ok now thanks to @Sixcode).
I hope someone can take a look at it, it's probably corrupted. I appreciate it very much..
Thank you..

I tried to update from 9226238 to 9395657

CAS3_EEPROM_PV91773.zip You have insufficient rights to see the content.

your eeprom fixed ok.rar You have insufficient rights to see the content.

Eric
53.2% (Neutral)
Newbie Topic Starter

2024-03-13T14:59:25Z

Problem solved.