Hello,

I would like to ask if reset / adaptation reset for ZF 8HP on BMW F-series
can be performed via OBD using AutoHex II, or if bench mode is required.

If bench connection is required, could you please advise about the pinout or
basic wiring between the AutoHex II interface and the ZF 8HP EGS connector
(e.g. power, ground, ignition, CAN H/L)?

At the moment I do not have the official cable and I am preparing a test setup.

Thank you.

Please reset EGS on car from ISN manager option 3 inside coding/programming menu.
To reset on-bench, go to Onbench----> EGS/EWS Reset option. The 8HP F-series wiring details are provided there.