Hi Is it possible to flash this ecu on the bench with autohex.

The problem with it is that is was update with autologic machine and the autologic flashed a file for a 118d and now the
car wont start . 123d.JPG You have insufficient rights to see the content.

Connect both on Bench: CAS + this DDE
Autohex II will flash it with the correct flash based on the FA calculation in the CAS.

But why you don't want to flash it on car?

Hi decno1 ,I can not use the car because
I had to get a uses ecu cas and key to fix this car because autologic said they could not help and it was before I bought the autohex , I want to try return the ecu to its correct flash so I have a spare ecu cas and key .
Do you have the pin outs for the dde I have the cas loom made up already

Regards Paul

You must be aware of something very important in Autohex II.
Autohex II flashs the ECU based on calculation of the FA stored in the CAS.
If you mount a different CAS (Different FA) Autohex II will flash this ECU in a different flash of what you want.
You can copy the FA from back up (from FA manager in Autohex II). after that quit the session, and enter it again: let Autohex II calculate Ecus flashs based on the new FA.

I guess you can find all pins in ISTA/D

Hi I have the original cas and key for ecu , what pins must I connect to ecu .
I will find the pin numbers in ista d . I just need to know which can and power supplies.

Regards Paul.

Hi support, i have connected the correct pins to the dde and cas, autohex can read the cas but it asks to mount the dde whats is needed to be able to read dde and flash it via obd on the bench thanks

Have you provided signals to ignition pins?

Hi i got it sorted and was able to flash the dde7 on the bench. i had the can wires mixed up. all looks ok the only thing is that it failed to encode or encoded with errors after. error code 8177

Please re check and confirm that error code is 8177

hi i have sent the ecu to the customer but i am sure the error was 8177
regards Paul

There is no error 8177
Possible 8117 which is related to engine working hours error.

Fixed the problem to customer by team viewer.
The error was 8117 not 8177,
This was a bug, to be solved in next release.