Hi , today i try to unlock FEM module on bench of F30 , but i cant make it.
In the final steep appears me one error and the unlock proccess dont complete , the FEM module is operative and i have one working key, i try with the ISN of the DME , and with the working key , can help me?

did you make update for femGW and fem BODY before unlocking.if still got issue contact support via skype.

Its possible on the bench? Or its necesary on the car?

Hi

You can do the whole thing on the bench if the car has an automatic gearbox. If it is a manual gearbox, you have to do part on the bench, part on the car for the unlock process.

You can program the FEM body and gateway on the bench, if the car is an automatic, if not and it's a manual, just do the programming in the car, as you will need ignition ON in order to program.

I think body first, then gateway.

Thanks

Also, check your configurations and make sure that under the 'BMW Configurations' tab, that 'Use DoIP (ENET) protocol when applicable' is ticked.

there is correction on Justin's part program gateway first then only body you can try it on bench.If got a working key and car better do it on car.

Today i make the update of the FEM and the problem are solved , thanks for all guys!!!!