Hi guys! I was working on new f15 with bdc and I updated few modules...all went fine except when I flashed DKOMBI autohex stuck at flashing bootloader and stoped.what are my options now I try flash 3more times no sucess and kombi have no coding now,please help me solve this I am far from home and dont have acess to other tools..thanks

Hi
Did you tried battery power reset for 30min ? and re flash again?

yes mate I did 2 times without suces..Iven support team give a try but didnt solve..thay say it is other modules making problems becouse thay see in programing section 3modules not compatible(they was used modules from same car) Than I was strugling with esys few ours and kombi back to life..than I was thinking why have autohex if cant properly flash kombi of f15??so I flashed it again with AH2 doip disabled , and it flashed it without problem 45minutes..

i had the exact same issue on a f12, updating kombi could only be done with doip off. the issue is in ip addressing most likely. ista p also wont do kombi on nbt cars if the ip is not right, for this purpose you need a router between icom and ista p laptop. strange enough esys works flawless with enet cable