i tried updating this module .after which the cluster went dead  IMG_6702.jpg You have insufficient rights to see the content.

Hi mate..dont wory,do it with esys and enet cable or with autohex and doip-protocol disabled..

Please wait until we release next update ,stable ENet communication will be there from next update.

I tried with doip disabled it does not work

I tried with doip disabled it does not work

try disconect batery negative cable for few minutes..reconect(make sure have 14volts) and flash again with doip disabled.also try repead few times if 1.atempt not work!for me worked few times in same situation like yours

After several attempts of trying to program this module it was finally done . I followed raschip procedure

Starting from version 1.0.52 no issue with KOMBI in ENET

thank you for updating me
do i still have to program with doip protocol off
there was another issue when i was trying to update the headlights it the adaptive led stopped working and so did the front indicators

I confirm doip enet programing is stable after latest update...In future you can enable doip , recently I flash newest bmw 2(whole car) and all went fine.noticed database also updated so you can try flash you lights again maybe you solve it..I flash/encode used ones wich was mounted on f45 after crash and iven wasnt same part no. all good