I ALSO NEED AN FA file for fem F30 320I FROM DECEMBER 2015 OR AT LEAST ONE FROM 2015
I HAVE A FEM AND I CAN'T ADAPT IT TO A F30 320I FROM 2015 BECAUSE THE ORIGINAL FEM IS DESTROYED AND I NEED A FA FROM 2015
DOES ANYONE KNOW IF I FIND THE ORIGINAL FEM PROGRAMS I COULD PAIR THEM WITH THE PROCESSORS AFTER ANOTHER FEM SH

Post car VIN and You will get FA for this car 😉

I ALSO NEED AN FA file for fem F30 320I FROM DECEMBER 2015 OR AT LEAST ONE FROM 2015
I HAVE A FEM AND I CAN'T ADAPT IT TO A F30 320I FROM 2015 BECAUSE THE ORIGINAL FEM IS DESTROYED AND I NEED A FA FROM 2015
DOES ANYONE KNOW IF I FIND THE ORIGINAL FEM PROGRAMS I COULD PAIR THEM WITH THE PROCESSORS AFTER ANOTHER FEM SH

you can restore FA to donor FEM on car. Backup FA is stored in cluster. Please see the below steps to replace FEM when original is completely dead.
Replacing FEM/BDC with used when no communication with original

1.Unlock and reset mileage for used FEM/BDC in Autohex
• if got working key unlock using it
OR
•Use option 3

2.Read ISN from original DME
3.write DME ISN to FEM from ISN manager option 4
4.change VIN for FEM/BDC(Cas replacement-->Advanced)
5.Program key if needed
6.connect FEM/BDC to car
7.Restore FA from FA manager
8.Go out to main menu and come inside coding/programming
9.Program GW and BODY from indiv programming (note it will do only coding because fem already updated)
10.Finish

BODY SERIES IS WBA8E1G58GNT36338
UNFORTUNATELY WE DO DONOR FEM IS COMPLETELY DEAD AND I HAVE NOTHING TO RECOVER FROM HIM THE ONLY THING I COULD RECOVER IS PHYSICAL EEPROM
I TRIED THE AUTOHEX VARIANT BUT UNFORTUNATELY IT DOESN'T WORK
BECAUSE IT CANNOT TRANSFER ALL THE NECESSARY EQUIPMENT BECAUSE FOR EXAMPLE THE 'COP' EQUIPMENT DOES NOT HAVE IT BASED ON F30
SO IT SEEMS THAT YOU NEED A BASIC FILE FROM THE YEAR ON WHICH YOU CAN BUILD WHAT EQUIPMENT YOU WANT EXCEPT THESE 'COP' WHO DON'T KNOW WHAT IT REPRESENTS
THANKS IN ADVANCE

BODY SERIES IS WBA8E1G58GNT36338
UNFORTUNATELY WE DO DONOR FEM IS COMPLETELY DEAD AND I HAVE NOTHING TO RECOVER FROM HIM THE ONLY THING I COULD RECOVER IS PHYSICAL EEPROM
I TRIED THE AUTOHEX VARIANT BUT UNFORTUNATELY IT DOESN'T WORK
BECAUSE IT CANNOT TRANSFER ALL THE NECESSARY EQUIPMENT BECAUSE FOR EXAMPLE THE 'COP' EQUIPMENT DOES NOT HAVE IT BASED ON F30
SO IT SEEMS THAT YOU NEED A BASIC FILE FROM THE YEAR ON WHICH YOU CAN BUILD WHAT EQUIPMENT YOU WANT EXCEPT THESE 'COP' WHO DON'T KNOW WHAT IT REPRESENTS
THANKS IN ADVANCE

did you tried the above steps we mentioned. As i said there i backup FA in cluster and you can restore from it. please contact support via skype/WhatsApp for more doubts.

I TRIED ALL THE VARIANTS INCLUDING WITH THE ASSISTANCE OF COLLEAGUES, THE PROBLEM IS THAT IF YOU DIDN'T DO AN ORIGINAL OR FROM THE SAYS OF COLLEAGUES A FA FROM THAT YEAR CANNOT BE RESTORED FEM, I HOPE TO GET A FA FROM THAT YEAR AND EVERYTHING WILL BE OK.THE PROBLEM IS THAT AN EQUIPMENT OPTION RESPECTIVELY "COP" DOES NOT APPEAR IN THE DATABASE AND IN CONCLUSION MISSING THAT GENERATES THE NON-RECOGNITION OF SOME EQUIPMENT ON THE CAR.

I TRIED ALL THE VARIANTS INCLUDING WITH THE ASSISTANCE OF COLLEAGUES, THE PROBLEM IS THAT IF YOU DIDN'T DO AN ORIGINAL OR FROM THE SAYS OF COLLEAGUES A FA FROM THAT YEAR CANNOT BE RESTORED FEM, I HOPE TO GET A FA FROM THAT YEAR AND EVERYTHING WILL BE OK.THE PROBLEM IS THAT AN EQUIPMENT OPTION RESPECTIVELY "COP" DOES NOT APPEAR IN THE DATABASE AND IN CONCLUSION MISSING THAT GENERATES THE NON-RECOGNITION OF SOME EQUIPMENT ON THE CAR.

we recommend you to contact via skype or WhatsApp on below details for more convenience.
Skype: microtronik@outlook.com
WhatsApp: +971555827622

The car is F30 from USA and our mate is trying to code the car with a FA/VO from a F31 Europe
He also write the FA in backup partner(REM) so now he dont have original VO at all...the problem is no icom and no esys ...all programs that he have are installed on tablet...and enet cable is not recognized
I will try later help him with original VO after he install corect esys and enet

The car is F30 from USA and our mate is trying to code the car with a FA/VO from a F31 Europe
He also write the FA in backup partner(REM) so now he dont have original VO at all...the problem is no icom and no esys ...all programs that he have are installed on tablet...and enet cable is not recognized
I will try later help him with original VO after he install corect esys and enet

contact support they can provide you some similar FA.

I already have original FA but he doesnt have Esys to write the FA
Original FA is xml.file and autohex use FFA.file
Thats why i need esys to write FA in car