Hello!

Got a CAS2. A "nice" guy tried to make a new key for it. Only one key is working, the workshop key, nothing else. Read out the eeprom and saw, that every key slot is locked, only one is used (nr. 3 - the key which is working). Is there a way to unlock the key slots on bench? In Hexprog I found no stuff for it.

CU Oliver

where is your file?

Hello!

Got a CAS2. A "nice" guy tried to make a new key for it. Only one key is working, the workshop key, nothing else. Read out the eeprom and saw, that every key slot is locked, only one is used (nr. 3 - the key which is working). Is there a way to unlock the key slots on bench? In Hexprog I found no stuff for it.

CU Oliver

you can enable keys from key learning option1 of auothex.
https://www.microtronik..../manage-current-bmw-keys 

Hello!

That's is a known possibility, but I've here only the CAS2, no car r smething else.

The eeprom file is attached.

CU Oliver

 CAS2_EEPROM_2020_11_25_17_57_19.rar You have insufficient rights to see the content.

 Cas 2.JPG You have insufficient rights to see the content. Cas2 eep.JPG You have insufficient rights to see the content.

So how will you add a key to the dump mate .. ?
it has 4 keys just now ...six blank spots after .

---

Hello!

That's correct. For keys are installed. But all key slots (except slot 3) are disabled/locked. I'm searching a way to enable the slots on bench.

CU Oliver

You can enable / disable / add key on the bench using Autohex as already stated above.

If you only have hextag, you will not be able to perform those functions with hextag alone.

---

Hello!

That's is a known possibility, but I've here only the CAS2, no car r smething else.

The eeprom file is attached.

CU Oliver

 CAS2_EEPROM_2020_11_25_17_57_19.rar You have insufficient rights to see the content.

you can connect CAS on bench.
 HW4 CAS3.png You have insufficient rights to see the content.