Milkyway
  •  Milkyway
  • 100% (Exalted)
  • Advanced Member Topic Starter
2021-03-05T12:19:12Z
Hello!

I'm not able to get a ISN from a DDE EDC16C35 (BMW) via OBD. Got always DDE ISN error. Car will not start (EWS error) with the original DDE and of course also with a new one - rolling code EWS error.

Any ideas to get the ISN via OBD? Will not open the DDE on bench.

CU Oliver
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Findlaybum
2021-03-05T17:02:48Z
Why won't you open the DDE then mate ???
OFFICIAL FRIEND OF OFFICIAL AUTOHEX II PARTNER .. AND OFFICIAL FRIEND OF THE BOSS .:)
Autohex_II_BMW
2021-03-06T09:48:36Z
Originally Posted by: Milkyway 

Hello!

I'm not able to get a ISN from a DDE EDC16C35 (BMW) via OBD. Got always DDE ISN error. Car will not start (EWS error) with the original DDE and of course also with a new one - rolling code EWS error.

Any ideas to get the ISN via OBD? Will not open the DDE on bench.

CU Oliver


some old model dde is not supported for ISN via autohex, if you send us eeprom from ECU we can give you ISN. either you can read EEPROM physically or can read in Hextag using the cloning license (you can try in factory mode without opening to read data in Hextag)

CipiCip
2021-03-06T19:25:10Z
But after reading eeprom and sending to you...in next update will be supported? Or autohex have a problem with some dde and those types of dde will not be supported ever???
Thank you
Autohex_II_BMW
2021-03-07T05:55:20Z
Originally Posted by: CipiCip 

But after reading eeprom and sending to you...in next update will be supported? Or autohex have a problem with some dde and those types of dde will not be supported ever???
Thank you



we will try to add the ISN via OBD in future updates.
Milkyway
  •  Milkyway
  • 100% (Exalted)
  • Advanced Member Topic Starter
2021-03-07T11:00:23Z
Hello!

I can read out the eeporm and send it to you (Mikrotronic). Is there a special mail adress or anything else for that?

I will not open the DDE cause it's not my car and the customer decided that I should not do it. It's his choice.

CU Oliver
sixcode
2021-03-07T11:52:42Z
Originally Posted by: Milkyway 

Hello!

I can read out the eeporm and send it to you (Mikrotronic). Is there a special mail adress or anything else for that?

I will nit ioen the DDE cause it's not my car and the customer decided that I should not do it. It's his choice.

CU Oliver



post eeprom file and i will give you the ISN
Milkyway
  •  Milkyway
  • 100% (Exalted)
  • Advanced Member Topic Starter
2021-03-07T14:35:23Z
Hello!

Thanks mate. Will read out the DDE tomorrow and load up the eepom.

CU Oliver
CipiCip
2021-03-07T20:28:28Z
Send eeprom to Microtronik
That way maybe they will add this type of dde in future
A lot of users from here can extract isn from.dump...but we want that autohex to be capable to read it on next updates...by obd and bench
So...please send eeprom also to Microtronik
Autohex_II_BMW
2021-03-08T05:43:16Z
Originally Posted by: Milkyway 

Hello!

I can read out the eeporm and send it to you (Mikrotronic). Is there a special mail adress or anything else for that?

I will not open the DDE cause it's not my car and the customer decided that I should not do it. It's his choice.

CU Oliver



you can contact us via skype/whatsapp/Email.
Skype: microtronik@outlook.com
WhatsApp: +971555827622
Email: tech.support15@micro-tronik.com
Milkyway
  •  Milkyway
  • 100% (Exalted)
  • Advanced Member Topic Starter
2021-03-08T15:22:38Z
Hello!

Anyway, the only way to get the eeprom is to do it in boot mode (EDC16C35 with MPC563. So I will do it (got the permission from the customer).

Will upload the eeprom here and send it also via mail to Mikrotronic.

EDIT: yeah, it's a MPC564 and Hextag is only providing MPC563. Always connection error with the MPC5xx module and BDM frame (Ref. 972).

CU Oliver
Autohex_II_BMW
2021-03-09T06:44:36Z
Originally Posted by: Milkyway 

Hello!

Anyway, the only way to get the eeprom is to do it in boot mode (EDC16C35 with MPC563. So I will do it (got the permission from the customer).

Will upload the eeprom here and send it also via mail to Mikrotronic.

EDIT: yeah, it's a MPC564 and Hextag is only providing MPC563. Always connection error with the MPC5xx module and BDM frame (Ref. 972).

CU Oliver



MPC564 must work in MPC563 option , you please contact support so they will check your connections.
jkcarelectrics
2021-03-10T12:13:48Z
You can read eeprom with a clip and the ISN is located at 0x42, 0x82 and 0xC2
Milkyway
  •  Milkyway
  • 100% (Exalted)
  • Advanced Member Topic Starter
2021-03-17T17:00:32Z
Hello!
Days later I got my BDM Adapter and I can read out the EDC16C35. The Ex-Eeprom is attached (and also send to Microtronik).

Thanks for help to get the ISN.

CU Oliver BMW_EDC16C35_EX-EEPROM_2021_03_17_17_55_50.zip You have insufficient rights to see the content.
Autohex_II_BMW
2021-03-18T06:00:26Z
Originally Posted by: Milkyway 

Hello!
Days later I got my BDM Adapter and I can read out the EDC16C35. The Ex-Eeprom is attached (and also send to Microtronik).

Thanks for help to get the ISN.

CU Oliver BMW_EDC16C35_EX-EEPROM_2021_03_17_17_55_50.zip You have insufficient rights to see the content.



ISN has been send on our WhatsApp support.
Milkyway
  •  Milkyway
  • 100% (Exalted)
  • Advanced Member Topic Starter
2021-03-18T13:13:45Z
Hello!

Thx for your help. Auto is running, job finished. :)

CU Oliver