Flash DME 17.2.G on bench · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

Milkyway
100% (Exalted)
Advanced Member Topic Starter

2021-04-07T10:16:05Z

Hello!

I've to flash a BMW DME 17.2.G directly on bench. Can someone give me the diagram to connect the DME?

I've here a coding station with CAS emulator and ZGW or a connected FEM with key.

CU Oliver

Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Wanna join the discussion?! Login to your Microtronik Autohex II and Hexprog forum forum account or Register a new forum account

keyproggdynia
66% (Friendly)
Member

2021-04-07T11:34:08Z

this type of programming is done flexray. you must have a ZGW, with ZGW you must connect to the driver but not via can l and can h. this link is read, there are other pins for programming.

keyproggdynia
66% (Friendly)
Member

2021-04-07T11:36:46Z

this type of programming is done flexray. you must have a ZGW, with ZGW you must connect to the driver but not via can l and can h. this link is read, there are other pins for programming.check it out on newtis.info but you have to buy an access

Milkyway
100% (Exalted)
Advanced Member Topic Starter

2021-04-07T12:41:51Z

Hello!

I will not need any newtis, I have access to ISTA (and sgate, Air a.s.o.). :)

So only the two flexray wires and not the CAN H and CAN L? And power supply of course.

CU Oliver

keyproggdynia
66% (Friendly)
Member

2021-04-07T12:53:22Z

find in dme / dde two pins marked in ista as programming. connect them between the driver and the Zgw. zgw to autohex via flexray. and of course 12v for everything. you will program dme / dde anyway

Autohex_II_BMW
100% (Exalted)
Advanced Member

2021-04-08T06:25:38Z

Originally Posted by: Milkyway

Hello!

I've to flash a BMW DME 17.2.G directly on bench. Can someone give me the diagram to connect the DME?

I've here a coding station with CAS emulator and ZGW or a connected FEM with key.

CU Oliver

Please see the attached diagram for MEVD1728 along with FEM made by one of our customer. MEVD172G pin out will be different from it but it will help you to identify what all pin need to be used.
fem and dme.png You have insufficient rights to see the content.

Milkyway
100% (Exalted)
Advanced Member Topic Starter

2021-04-09T11:12:50Z

Hello!

Thx. As I can see, the DME 17.2.G has Flexray on Pin 33 and 34 on connector 1b and PT-Can on Pin 7 and 8. B+ is on 45 and ground on Pin 4 in 5b. So I will test it in this way and will report.

CU Oliver

Ninety
50.8% (Neutral)
Newbie

2023-04-21T07:52:28Z

Originally Posted by: Milkyway

Hello!

Thx. As I can see, the DME 17.2.G has Flexray on Pin 33 and 34 on connector 1b and PT-Can on Pin 7 and 8. B+ is on 45 and ground on Pin 4 in 5b. So I will test it in this way and will report.

CU Oliver

No report.

I Will try and report

signatureindy
55.6% (Neutral)
Newbie

2024-11-16T07:23:13Z

Originally Posted by: Ninety

Originally Posted by: Milkyway

Hello!

Thx. As I can see, the DME 17.2.G has Flexray on Pin 33 and 34 on connector 1b and PT-Can on Pin 7 and 8. B+ is on 45 and ground on Pin 4 in 5b. So I will test it in this way and will report.

CU Oliver

No report.

I Will try and report

No Report.

I will try and report.......