Hello
I have cas3 dead i need repair eeprom i wrote another eeprom to cas and comes alive  CAS3_EEPROM_2021_08_18_17_58_12.rar You have insufficient rights to see the content.

Hello
I have cas3 dead i need repair eeprom i wrote another eeprom to cas and comes alive  CAS3_EEPROM_2021_08_18_17_58_12.rar You have insufficient rights to see the content.

you need to program key and do this steps:
The normal steps for the replacement of CAS (when original CAS is dead)
1. Get a working CAS with valid key
2. Read DME ISN and write it to CAS
3. Restore FA from LM to CAS from FA manager
4. Change VIN for CAS from advanced option in CAS replacement
5. GO back to the main menu in software
6. Start again with coding/programing
7. DO coding for CAS

Hi
thank you
I know but the car is far away from me
only i have cas and key that's why i need repair old eeprom

Hi
thank you
I know but the car is far away from me
only i have cas and key that's why i need repair old eeprom

check your original eeprom in hextag if its in programming mode or normal mode.
If in programming mode change to normal-->save and write eeprom back
read again to confirm changes.
you can also write one good flash if you want.
 programmign mode cas.png You have insufficient rights to see the content.