hi

what is needed(KEYS, JBE etc) to work with a mini frm2 on bench, so update/check flash etc

same for FRMFA and FRM3 please

how hard can it be to answer this question??

Only need frm, jbe and obd2 port

---

got it working for all 3 versions on bench incl tool32 connect

im trying to update programming a frm2 r56 on bench i get error code 8343

if i get one from my stock thats does update fine even flash same flash as there is no update

also this from your website:

NOTE: In some cases FRM II has lost OBD communication when read/write FLASH, so if you are working on changing FRM data do only EEPROM.

this does have a reason, flash in "not" readed correct by tool, also other ori tools have same error(seams they made copy of some ori tool in the past and used it) even beeprog ori makes the same faulty reading in 16mb file

data 00000000 to 0001FB90 is missing if read a 256 kb file

edit

made a ton of tests and have the answer now as you can read

so in short if you clone this mc9s12xdt256 data is missing and result in dead frm, normal frm2 uses 0.290 amp dead one 0.210 amp because its not booting both with jbe connected also
1 out of 10 mc9s12xdt256 readings is correct

edit2

95% of the frm2 backup files you can download from the forums will result in a dead frm2 if you use them, so you have been warned

edit3

for Autohex-II-BMW:

i can update online/code the frm2 R56 module but can not extract FA from module on bench, always get error module not available

proof:

 

if frm or cas connected not compatible and you may have the same message like module not responding when restore fa . for frm 2 it is advised to transfer only eeprom not flash . so frm 2 will communicate on car. please check cas and frm are compatible to make fa restore onbench.

if frm or cas connected not compatible and you may have the same message like module not responding when restore fa . for frm 2 it is advised to transfer only eeprom not flash . so frm 2 will communicate on car. please check cas and frm are compatible to make fa restore onbench.

please read what i did write above, there is your answer for dead frm!

Can you guys provide a wiring diagram for the setup?

Please check the wiring diagram on the Hexprog software.