bmw f11.txt You have insufficient rights to see the content. CAS4_2_2016.11.11 18.55.18.TXT You have insufficient rights to see the content. ACSM3_2016.11.11 18.46.45.TXT You have insufficient rights to see the content. D73N57E0_2016.11.11 18.54.22.TXT You have insufficient rights to see the content.Hi . bmw f11 2010 cas damaged. I read flash EEPROM. ive loaded it into the new cas. everything is OK . I've done programming and coding. I can not erase the errors in the module

What fault codes you got?

AIRBAG Crash Safety Module (ACSM3 -)

Faults: 9309A8 Pedestrian protection system, front left: coding data do not match equipment
9309AE Pedestrian protection system, front right: coding data do not match equipment
9309B4 Pedestrian protection system, rear left: coding data do not match equipment
9309BA Pedestrian protection system, rear right: coding data do not match equipment
930BC1 FGS safing sensor plausibility fault
930B11 Pedestrian protection sensor (optical fiber) Coding data does not match equipment

ZGW Central Gateway (ZGW_01 -)
Serial number - 0000321233
Faults: 801C20 ZGM: central fault memory full - no control-module fault

Looks like coding is wrong in ascm or someone was playing with esys and tried to code out the pedestrian protection sensors so the did not have to replace them

It turned out that the error was in the FA. lack of $ 8TF. I added it. I wrote in ZGW and Cas. Now all ok. Greetings from Poland

FA changed
you can chNGE IT FROM ECU