not work many times many test but no matching


in cas number egs work good write but not matching have problems??

 egs.png You have insufficient rights to see the content.

What I found strange and that does not program this module is also that it gave some problem?
 egsprogramation.png You have insufficient rights to see the content.

internet ok all ok i test another module work ok

You cannot program EGS if ISN is not matched. Ecu will reject the security access before it starts flashing.
You must solve the isn problem first.
As I see the ISN could be retrieved, check cas and egs fault codes.

I changed the cas in this car, and it pulls the password of the normal isn, it pulls 2 passwords but does not finish the matching, the fault in the egs is immobilizer.

There is a high possibility that the EGS is faulty, can you try with another one?

i test another egs but same error ....now i send fault codes in egs and Cas not work .... saturday i test new cas i do no matching dme is all ok no problem but egs not work egsnova2.png You have insufficient rights to see the content. egsnova2_3.png You have insufficient rights to see the content.



error is same original egs , I CHANGE eGS BUT ERROR IS SAME .... PROGRAMATION INDIVIDUAL NOT WORK AND MATCHING NOT WORK

There are problems in communications among cas,dme and egs.
Check these faults with ista-d and follow up.