IMG_9150.JPG You have insufficient rights to see the content. IMG_9161.JPG You have insufficient rights to see the content.
hello i had customer replace used DME.. as u can see photo upload Old current and used 2nd DME replaced
the previous DME is MSV80.1 ' 7 609 658 ' 5WK91155 SO 2nd hand Used DME is MSV80.0 5WK91136, after using autohex ii complete ALL STEP DONE, BUT i have the code storage in DME is : Incorrect data ............as long i cleared the code come back after Initial try start the engine
-I check have injector pulsing, have strong spark, fuel pump run does have fuel pressure, replace new spark plugs as well..... i notice when i crank try start the engine the engine crank fine try to catch up to start but the code ' Incorrect data ' still show storage Active in DME
-also i watching the RPM sparely move about 159min/lb mean it's seem not correct flash data calibration file;s from using autohex II down load from server
-my question is there problem wrong flash DME when using autohex II or wrong DME can cause Incorrect data.....?? this car is USA not Euros so may be mean wrong data flash calibration because autohex II server is programming wrong calibration file's.........????????
-what should i do to fix this.......??? programming per istap or what should get another DME to match number size by size......????? customer replace how own.....until i really i found out y is Incorrect Data code storage in DME because all i can see both DME number is not match from MSV80 to MSV80.1 that all i can ask for this foruum to help so i can get this car start.............please help
benz