please help me
coding stoped by messege
coding:error when calculating coding for ecu
reference:831e

If you are using a used Ecu, please make sure it is hardware compatible.
If you get in the programming list a status "Not Compatible", this means you must replace this ECU with another one who is at least Hardware compatible.
If Ecu not compatible, it is very possible to reject the coding as well.

Please see picture below:

 Untitled.jpg You have insufficient rights to see the content.

as i know, autohex will not program a module not comaptible.
why you guys don't give a chance to try with not comaptible modules? possible to work maybe 🙂

Trust me, if we know there is a small chance, we would consider it.
Incompatible means: different boot, different flash size.

hi dear
this ECU orginal factory
this car stopped workin usb port
bus connection ok
most connection ok
can not read HW part NO & SW part NO
CMB_media ecu not access
CMB_ECall can not codding programming
coding:error when calculating coding for ecu
reference:831e
http://www.micro-tronik....um/resource.ashx?image=5 
http://www.micro-tronik....forum/album?u=22&a=4 

Did you note that your CMB_Media is not responding? how you expect that you can flash or code CMB_ECAL this way?
Another note, it is clear: No HW/SW numbers detected in both ECUs.