is there anyone about to update this FEM ive been up since 0545hrs trying to get someone on Skype to help

It's Friday mate .... no chance today go to the pub come back tomorrow ..

---

Guys i ve got an BMW F30 wich fem stopped working, it is not communicating anymore.
Is it possible to program used fem from donnor???
BR

Leo

Guys i ve got an BMW F30 wich fem stopped working, it is not communicating anymore.
Is it possible to program used fem from donnor???
BR

Leo

Replacing FEM/BDC with used when no communication with original

1.Unlock and reset mileage for used FEM/BDC in Autohex
• if got working key unlock using it
OR
•Use option 3

2.Read ISN from original DME
3.write DME ISN to FEM from ISN manager option 4
4.change VIN for FEM/BDC(Cas replacement-->Advanced)
5.Program key if needed
6.connect FEM/BDC to car
7.Restore FA from FA manager
8.Go out to main menu and come inside coding/programming
9.Program GW and BODY from indiv programming (note it will do only coding because fem already updated)
10.Finish

Also bear in mind, that if the car has a manual gearbox, the steering lock won’t release once the replacement FEM is installed.

You will then have to either make the ELV virgin, or use the ELV
from the donor car.

Thanks
J

You will then have to either make the ELV virgin

Justin,

any more info on this?
or link

thanks

 f30_elv_95040_virgin test.rar You have insufficient rights to see the content.

You can try this file to virginise the ELV