1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. BMW Locksmith
  4. Add key failed cas4+ f01
Sittner B
2018-12-21T21:52:30Z
Hi everyone i try today to add second key on cas4+, i load the dump from cas i tape isn from ecu engine but but key doesn’t work properly.It start only if I keep key near coil and remote doesn’t work i make 868 mhz... Could be key issues??? I try 3 blank key all same problem
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

rbauto
2018-12-22T00:43:09Z
That’s a key issue. Maybe wrong frequency or bad renew.
Sittner B
2018-12-22T08:37:36Z
I try 3 keys with 868 mhz but all from same suplier, could be key issue?? I order ney key again
useyourbrains
2018-12-22T09:21:16Z
Originally Posted by: Sittner B 

I try 3 keys with 868 mhz but all from same suplier, could be key issue?? I order ney key again



Use original unlocked key, with china keys there is a lot problems.
Mariusz
2018-12-23T16:37:28Z
Originally Posted by: Sittner B 

Hi everyone i try today to add second key on cas4+, i load the dump from cas i tape isn from ecu engine but but key doesn’t work properly.It start only if I keep key near coil and remote doesn’t work i make 868 mhz... Could be key issues??? I try 3 blank key all same problem


CAS4+ require key setup for EWS5 most of the keys available on the market are setup for cas4 and read EWS4. that's why proxy and remote not working. can see u from London too. If you need I have keys on stock which will 100% work
rjautolocksmith
2018-12-23T17:06:13Z
Cas4+ use keys part number starting in huf566 small board and newer model.older Cas4 use 5wk4966 big board.
Sittner B
2018-12-28T16:02:13Z
Originally Posted by: Mariusz 

Originally Posted by: Sittner B 

Hi everyone i try today to add second key on cas4+, i load the dump from cas i tape isn from ecu engine but but key doesn’t work properly.It start only if I keep key near coil and remote doesn’t work i make 868 mhz... Could be key issues??? I try 3 blank key all same problem


CAS4+ require key setup for EWS5 most of the keys available on the market are setup for cas4 and read EWS4. that's why proxy and remote not working. can see u from London too. If you need I have keys on stock which will 100% work


leave me your number to call you..thank you
useyourbrains
2018-12-29T07:47:00Z
Had same problem just with 315mhz key. Read cas4 with hextag and addes key with autohex, only starting near coil works. Never had problems with this type key and other device.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. BMW Locksmith
  4. Add key failed cas4+ f01