1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. DME MEVD1728 file
samoudshoorn
2018-12-29T10:33:58Z
Can some one help me?
I have a BMW M5 F10 in my shop.
Problem of the car after updating the car (with ISTA) the DME did't work any more.
Customer brought the car to me and I tried to re write it with AUTOHEX but didn't succeed.
Now I have 1 ECU out the car and open. Reading succeed with boot pin on it.
Can some one tell me if I can put just the CAFD file in or do I have to edit it for this car?
And does some one have CAFD-00000B0A-000.043.000/CAFD-00000B0A-000.060.001 for me?
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

roxetteer
2018-12-29T14:22:11Z
can you be more specific? do you have any fault codes stored in the DME?
samoudshoorn
2018-12-29T16:06:29Z
It wasn't possible to read out foutcodes.
When I open diagnostic mode AUTOHEX didn't identified the DME
When I open programming mode on OBD AUTOHEX could read HW and SW number but couldn't write a new coding or flash in to the DME.
So I open de ECU and readed it on the bench with boot mode. DME_EEPROM M5 F10.bin.zip You have insufficient rights to see the content. WhatsApp Image 2018-12-29 at 10.27.07 kopie.png You have insufficient rights to see the content.
Levanime
2018-12-29T16:51:16Z
was it open before?
or drilled?
samoudshoorn
2018-12-29T17:49:33Z
I open it (took the cover out)
I don't think its opent before and my customer could't tell me if it was tuned before.
So the car was bringed in with broken / not working ECU's
(I did not open the other ECU that one is still in the car)
samoudshoorn
2018-12-29T20:42:22Z
This is the error that I got when the car came in.
Same code when I tried to do "Indiv Coding"
 Unknown.jpg You have insufficient rights to see the content.
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2018-12-29T22:50:03Z
831F means ECU rejects to enter the coding session, this haapens if some conditons not met ( usually should not happen with dme) or ecu has an internal problem. You had to read fault codes as this would let’s have more clues.
samoudshoorn
2018-12-30T13:49:41Z
Yes it didn't came in coding / programming mode also with ISTA
Only problem is it didn't came in diagnose mode as well.

The customer had a working car and after doing updates on different modules (4x a4 papers with updates) the DME didn't work any more
As you can see in the WhatsApp image both DME updates are aborted (afgebroken)

So I think it is only a software issue but I don't have the original bin file to put in to this ECU.
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2018-12-31T15:00:30Z
Can you tell the status of this DME from Autohex programming list?
Like is Update available, and can you see the both numbers of hardware and software?
samoudshoorn
2018-12-31T16:10:08Z
 2018-12-31 17.07.57.jpg You have insufficient rights to see the content.

This was reared at the beginning (but couldn't update it with auto hex)
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2018-12-31T22:31:04Z
It is already updated, Autohex will try only to code the DME.
rsachip
2019-01-04T01:22:09Z
post the sticker or complete ID from ecu we will try to find solutiun for you..and yes like admin sayed Fxx have diferent strategy of updating ecu than Exx cant update if alredy latest(only esys)
samoudshoorn
2019-01-09T08:08:43Z
I have put a few files and pictures in my dropbox
dropbox link 
samoudshoorn
2019-01-09T22:13:40Z
Car is still in my shop.
Some one told me it could be fixed with esys (he took over my PC) but he wouldn't fix it for me because he wanted the car into his shop ...
Only I don't have any experience with esys (that's the reason I bought AutoHex that's a lot easier) but on this case its getting quite frustrating.

If any one has some tips or tricks please let me know.
I am thinking to put AVDI on it and demolish the DME with it (AVDI is great int demolish BMW) and after that fix it with AutoHex.
I have previously been lucky with this way.

If any one can help please let me know.
useyourbrains
2019-01-10T16:26:39Z
Originally Posted by: samoudshoorn 

Car is still in my shop.
Some one told me it could be fixed with esys (he took over my PC) but he wouldn't fix it for me because he wanted the car into his shop ...
Only I don't have any experience with esys (that's the reason I bought AutoHex that's a lot easier) but on this case its getting quite frustrating.

If any one has some tips or tricks please let me know.
I am thinking to put AVDI on it and demolish the DME with it (AVDI is great int demolish BMW) and after that fix it with AutoHex.
I have previously been lucky with this way.

If any one can help please let me know.



write me in pm, I can help You fix it with esys
samoudshoorn
2019-01-10T21:26:55Z
Auto-Hex thanks for the great support!!!
DME's are running again on the latest software awesome.

Everyone else who helped thanks for your time as well.
rsachip
2019-01-19T05:35:55Z
Originally Posted by: samoudshoorn 

Auto-Hex thanks for the great support!!!
DME's are running again on the latest software awesome.

Everyone else who helped thanks for your time as well.


Hi.. how did you guys fix it?
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2019-01-19T12:04:37Z
Autohex II reflashed all Ecu flash.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. DME MEVD1728 file