Hi,
Tried to read the ECU MEDV17.4 (7588502) ON BENCH from a TS87256 Mini
What I did;
Connected pin C5, C6, C18 and C30 to 12V
Connected pin C3, C4 and C53 to ground
Connected pin C40 to CAN HIGH (pin 6 on OBD)
Connected pin C52 to CAN LOW (pin 14 on OBD)
Used pin C19 for WAKE-UP
Unfortunately AutoHEX won't connect to the ECU. Do you have any suggestions? If I check CAN HIGH and LOW with a scope I see no activity (messages) only straight 2.5V for both CAN lines
Best regards,
Asim
Edited by user
2019-02-27T15:48:01Z
|
Reason: Not specified