1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. bmw cluster F10 6WA 160DQWT
chang2
  •  chang2
  • 73.2% (Friendly)
  • Member Topic Starter
2019-04-07T10:32:03Z
hello,

i read the chip and save the file. How do I change the mileage?

with another editor? I thought there is a deletion function.

Thanks

 Zwischenablage01.jpg You have insufficient rights to see the content.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

useyourbrains
2019-04-07T10:38:39Z
Originally Posted by: chang2 

hello,

i read the chip and save the file. How do I change the mileage?

with another editor? I thought there is a deletion function.

Thanks

 Zwischenablage01.jpg You have insufficient rights to see the content.



To delete mileage, fill first 2 rows with 00.
chang2
  •  chang2
  • 73.2% (Friendly)
  • Member Topic Starter
2019-04-07T11:14:58Z
Okay thanks,

but is this chip supported: 160DQWT ?
Autohex_II_BMW
2019-04-07T11:15:07Z
Originally Posted by: chang2 

hello,

i read the chip and save the file. How do I change the mileage?

with another editor? I thought there is a deletion function.

Thanks

 Zwischenablage01.jpg You have insufficient rights to see the content.


yes make first 2 rows to 00 and write eeprom
chang2
  •  chang2
  • 73.2% (Friendly)
  • Member Topic Starter
2019-04-07T11:47:38Z
Originally Posted by: chang2 

Okay thanks,

but is this chip supported: 160DQWT ?




and this works also?

thanks
Findlaybum
2019-04-07T12:23:39Z
The editor will be added in the next update I think.. just use any editor until it is.. read , save, edit, load then write .. as for the WT suffix . I think this is still being worked on .. but I have been known to be wrong 🙂
OFFICIAL FRIEND OF OFFICIAL AUTOHEX II PARTNER .. AND OFFICIAL FRIEND OF THE BOSS .:)
Autohex_II_BMW
2019-04-07T14:03:55Z
Originally Posted by: Findlaybum 

The editor will be added in the next update I think.. just use any editor until it is.. read , save, edit, load then write .. as for the WT suffix . I think this is still being worked on .. but I have been known to be wrong :)



Latest update for HEXTAG is available.we have added more controls like BCM for LRE,Nissan,Infinity,Renault and wide range of car models are added for key reset.all users get this for free of cost.
https://www.microtronik....xprog-software-id-100045 
chang2
  •  chang2
  • 73.2% (Friendly)
  • Member Topic Starter
2019-04-07T14:17:56Z
Hello,

now is with mileage editor.

thanks

 hexprog_1.0.5.jpg You have insufficient rights to see the content.
chang2
  •  chang2
  • 73.2% (Friendly)
  • Member Topic Starter
2019-04-07T21:11:45Z
Originally Posted by: chang2 

Originally Posted by: chang2 

Okay thanks,

but is this chip supported: 160DQWT ?




and this works also?

thanks



and this question is still open.

thx
Autohex_II_BMW
2019-04-08T06:15:41Z
Originally Posted by: chang2 

Originally Posted by: chang2 

Originally Posted by: chang2 

Okay thanks,

but is this chip supported: 160DQWT ?




and this works also?

thanks



and this question is still open.

thx


yes supported

Findlaybum
2019-04-08T09:41:44Z
Just tried .. reading and writing it under D0WQ .. and it works 🙂
OFFICIAL FRIEND OF OFFICIAL AUTOHEX II PARTNER .. AND OFFICIAL FRIEND OF THE BOSS .:)
Arthur
2019-04-09T04:25:26Z
HI, What about VIN? Can we change VIN on this feature? Thank you.
Autohex_II_BMW
2019-04-09T06:21:28Z
Originally Posted by: Arthur 

HI, What about VIN? Can we change VIN on this feature? Thank you.



VIN is not possible now but its very easy to edit VIN in some hex edit software,we will try to add this also in coming updates.
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2019-04-10T20:35:06Z
For VIN in this eeprom (short vin), just code the KOMBI, it will be changed this way.
Carprogrammer
2019-04-11T05:15:10Z
Originally Posted by: Arthur 

HI, What about VIN? Can we change VIN on this feature? Thank you.



Clear or change vin manually with hex editor then coding.
No other way exist by OBD
AUTOHEX_BMW
2019-04-28T12:22:59Z
Originally Posted by: Admin 

For VIN in this eeprom (short vin), just code the KOMBI, it will be changed this way.


In F series don't work to change vin with coding. This cluster has 2 eeproms and 4 vin numbers, 2 long and 2 short. The only way that matter is short vin from 160dqwt. But it has checksum after him, if you change must calculate mandatory checksum, if not you will have tamper dot on display. Checksum is CC-ITT 16 bit
Sarmad
2019-05-15T13:43:07Z
Originally Posted by: Admin 

For VIN in this eeprom (short vin), just code the KOMBI, it will be changed this way.


I tried in E series to change the VIN by coding the kombi it not changed.
BMWZG
  •  BMWZG
  • 100% (Exalted)
  • Advanced Member
2019-05-15T14:33:42Z
Good understanding is essential , as @Carprogrammer says : Clear or change vin manually with hex editor - then coding. So , nobody says that is posiible only with coding...
Carprogrammer
2019-05-16T15:54:37Z
Originally Posted by: BMWZG 

Good understanding is essential , as @Carprogrammer says : Clear or change vin manually with hex editor - then coding. So , nobody says that is posiible only with coding...



Nobody have a time to read to posts up :)
tschek
2020-03-18T12:39:51Z
Can the 160dowt be copied to an other 160dowt without get the dot?
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. bmw cluster F10 6WA 160DQWT