reading ecu hexprog · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

CBDIAG78
62% (Friendly)
Newbie Topic Starter

2019-09-12T20:25:20Z

Hello everyone

finally an update expected hexprog

reading edc17c64 ok
reading edc17c10 no ok problem feeding or broaching

edc17cp14 no ok like

reading with autotuner edc17c10 ok
edc17cp14 ok

need an update for stability

thank you

Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Wanna join the discussion?! Login to your Microtronik Autohex II and Hexprog forum forum account or Register a new forum account

Admin
100% (Exalted)
Administration

2019-09-13T02:36:37Z

Thanks for the feedbacks.
We need the log files, can you please contact us on live chat tomorrow? ( today is off)

chang2
73.2% (Friendly)
Member

2019-09-15T09:35:07Z

Hello,

i have the same error with bmw edc17 c50 and c56

cannot communicate with ecu using Factory Mode -Ref-: 160

I also see no output voltage.

error_160.jpg You have insufficient rights to see the content.

BMWZG
100% (Exalted)
Advanced Member

2019-09-15T10:05:12Z

For me EDC17C50 works well.
EDC17C50- factory mode - ident.jpg You have insufficient rights to see the content. EDC17C50- factory mode - Pflash -write.jpg You have insufficient rights to see the content. EDC17C50- factory mode.jpg You have insufficient rights to see the content.

bratick
100% (Exalted)
Advanced Member

2019-09-15T12:26:07Z

Where I can find module code? Can it be done by part number?

chang2
73.2% (Friendly)
Member

2019-09-15T15:18:24Z

Originally Posted by: bratick

Where I can find module code? Can it be done by part number?

hello,

here:

https://www.bosch-automo...roduct-search?country=DE

chang2
73.2% (Friendly)
Member

2019-09-15T15:41:04Z

Originally Posted by: chang2

Hello,

i have the same error with bmw edc17 c50 and c56

cannot communicate with ecu using Factory Mode -Ref-: 160

I also see no output voltage.

error_160.jpg You have insufficient rights to see the content.

Hello,

and read with autohex works, isn and hours.

bratick
100% (Exalted)
Advanced Member

2019-09-15T17:19:57Z

Originally Posted by: chang2

Hello,

i have the same error with bmw edc17 c50 and c56

cannot communicate with ecu using Factory Mode -Ref-: 160

I also see no output voltage.

error_160.jpg You have insufficient rights to see the content.

For me works check wirings. I have mess up with wirings and same error in the begining

Autohex_II_BMW
100% (Exalted)
Advanced Member

2019-09-16T05:40:27Z

Originally Posted by: chang2

Originally Posted by: chang2

Hello,

i have the same error with bmw edc17 c50 and c56

cannot communicate with ecu using Factory Mode -Ref-: 160

I also see no output voltage.

error_160.jpg You have insufficient rights to see the content.

Hello,

and read with autohex works, isn and hours.

wiring is not same for autohex and hextag.in autohex you will use the extra added wires on pin 14 and pin 15 but for hextag you need to use the stock blue and green wires(same wires used for CAS connection).make sure you connected the correct wires.

chang2
73.2% (Friendly)
Member

2019-09-16T22:19:53Z

#10

Hello,

now:

- EDC 17C56-2.48 / 0281019997 --> works factory mode + boot mode

- EDC 17C50-3.58 / 0281019680 --> works factory mode ( ecu it is not open)

- EDC 17C50-3.13 / 0281018813 --> it is broken, I forgot it. That was my fault.

Thanks

pecska77
56.2% (Neutral)
Newbie

2019-09-17T18:08:38Z

#11

Hi all , i have managed to read and write, clone msd85.0, 5wk93827, without any modification of the wiring for hextag , using same wiring set up as autohex tricore, not problem at all.
all function working well. msd85 D-flash.PNG You have insufficient rights to see the content.
msd85 ex-eeprom.PNG You have insufficient rights to see the content. msd85 info.PNG You have insufficient rights to see the content. msd85 D-flash.PNG You have insufficient rights to see the content.