1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. cas
sakis
  •  sakis
  • 79.6% (Friendly)
  • Member Topic Starter
2019-09-24T18:30:57Z
hello two questions can hex tag clone cas units and program new keys or you must have autohexx software also.
thanks...
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

bratick
2019-09-24T18:51:44Z
Can clone but need autohex for keys programing
Autohex_II_BMW
2019-09-25T08:36:12Z
Originally Posted by: sakis 

hello two questions can hex tag clone cas units and program new keys or you must have autohexx software also.
thanks...



yes hextag can clone cas just transfer eeprom and flash.when you clone original keys will work on used cas because key data stored in eeprom
sakis
  •  sakis
  • 79.6% (Friendly)
  • Member Topic Starter
2019-09-29T16:17:58Z
thanks for answer all cas?
Autohex_II_BMW
2019-09-30T08:36:23Z
Originally Posted by: sakis 

thanks for answer all cas?



we support from cas2 and up.
sakis
  •  sakis
  • 79.6% (Friendly)
  • Member Topic Starter
2019-09-30T10:26:08Z
Originally Posted by: Autohex_II_BMW 

Originally Posted by: sakis 

thanks for answer all cas?



we support from cas2 and up.


can i clone data from cas3 to cas3+?
Thank you..
Autohex_II_BMW
2019-09-30T16:05:41Z
Originally Posted by: sakis 

Originally Posted by: Autohex_II_BMW 

Originally Posted by: sakis 

thanks for answer all cas?



we support from cas2 and up.


can i clone data from cas3 to cas3+?
Thank you..



yes you can but after clone don't program it.
sakis
  •  sakis
  • 79.6% (Friendly)
  • Member Topic Starter
2019-10-06T11:55:28Z
one more thing in live bench reading an external power supply needed in wich pins must connect tthe suplier's cables and how a adjust the current and voltage?
thank you...
Autohex_II_BMW
2019-10-06T12:03:51Z
Originally Posted by: sakis 

one more thing in live bench reading an external power supply needed in wich pins must connect tthe suplier's cables and how a adjust the current and voltage?
thank you...



Yes you need to use 12V 3A power supply for doing works in hextag and connection diagram is available in software itseld.we recommend to use an AC/DC power adapter good quality one.
sakis
  •  sakis
  • 79.6% (Friendly)
  • Member Topic Starter
2019-10-06T15:05:38Z
of course, i use 12v 3A adapter all the time i solder the wires as the diagram shows but i get an ( you need an external power supply)message when it comes to read the cas.maybe i must solder better the pins?
Autohex_II_BMW
2019-10-07T07:47:36Z
Originally Posted by: sakis 

of course, i use 12v 3A adapter all the time i solder the wires as the diagram shows but i get an ( you need an external power supply)message when it comes to read the cas.maybe i must solder better the pins?



please contact support in skype.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. cas