Cas 3 no coming on. · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

Juan Abreu
53.2% (Neutral)
Newbie Topic Starter

2019-09-29T07:18:57Z

Hi. to all. I am working in bench, cas 3, I program the keys and everything ok, then I go to the Godcar simulator and the ignition never coming on ??, I am using Keys Hub virginized by Hextag, everything seems fine, but does not allow ignition?

Sponsor

Start Ecu Tuning today with Hexprog II Basic Set, all from an incredible price: ONLY USD 575.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
100% (Exalted)
Advanced Member

2019-09-29T08:19:04Z

Originally Posted by: Juan Abreu

Hi. to all. I am working in bench, cas 3, I program the keys and everything ok, then I go to the Godcar simulator and the ignition never coming on ??, I am using Keys Hub virginized by Hextag, everything seems fine, but does not allow ignition?

please check key is shows as YES in slot in key learning option 1.also if you do cas firmware restore it if key showing YES.

Juan Abreu
53.2% (Neutral)
Newbie Topic Starter

2019-09-29T09:24:48Z

Yes Mr, I put the key in the Goldcar simulator key slot and it looks in slot 9. This cas 3 does not need firmware, so says the software.

cardiagcom
100% (Exalted)
Advanced Member

2019-09-29T11:56:09Z

Connect ELV or put CAS to CAR and you will see

Juan Abreu
53.2% (Neutral)
Newbie Topic Starter

2019-10-01T08:59:09Z

Is that the simulator already has the ELV.

miksonics
65.8% (Friendly)
Member

2019-10-03T19:58:54Z

if the cas3 cam with car then it have ELV, plug in your scanner and do ELV reset and second ignition should open if your key is not been crossed meaning key ok.