1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. Cas 3 no coming on.
Juan Abreu
2019-09-29T07:18:57Z
Hi. to all. I am working in bench, cas 3, I program the keys and everything ok, then I go to the Godcar simulator and the ignition never coming on ??, I am using Keys Hub virginized by Hextag, everything seems fine, but does not allow ignition?
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2019-09-29T08:19:04Z
Originally Posted by: Juan Abreu 

Hi. to all. I am working in bench, cas 3, I program the keys and everything ok, then I go to the Godcar simulator and the ignition never coming on ??, I am using Keys Hub virginized by Hextag, everything seems fine, but does not allow ignition?


please check key is shows as YES in slot in key learning option 1.also if you do cas firmware restore it if key showing YES.
Juan Abreu
2019-09-29T09:24:48Z
Yes Mr, I put the key in the Goldcar simulator key slot and it looks in slot 9. This cas 3 does not need firmware, so says the software.
cardiagcom
2019-09-29T11:56:09Z
Connect ELV or put CAS to CAR and you will see
Juan Abreu
2019-10-01T08:59:09Z
Is that the simulator already has the ELV.
miksonics
2019-10-03T19:58:54Z
if the cas3 cam with car then it have ELV, plug in your scanner and do ELV reset and second ignition should open if your key is not been crossed meaning key ok.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II DME/DDE and CAS ISN
  4. Cas 3 no coming on.