Ano
  •  Ano
  • 53.8% (Neutral)
  • Newbie Topic Starter
2019-11-01T20:16:59Z
Hello,
i have tried to read my Simos 18.1 Seat ecu and Hextag is stuck at the unlocking process so i have the log file if needed.
I know it is beta right now so any help would be appreciated.
The rest is working fine so service mode is working on EDC17C74 and MED17.1.1 and BMW of course also.
best regards Chris
 Tricore_18.zip You have insufficient rights to see the content.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2019-11-02T06:34:16Z
Originally Posted by: Ano 

Hello,
i have tried to read my Simos 18.1 Seat ecu and Hextag is stuck at the unlocking process so i have the log file if needed.
I know it is beta right now so any help would be appreciated.
The rest is working fine so service mode is working on EDC17C74 and MED17.1.1 and BMW of course also.
best regards Chris
 Tricore_18.zip You have insufficient rights to see the content.



hi,
Thank you for your feedback sir.yes some simos 18.1 we are get issue for unlocking due to power.we are working on it.
Ano
  •  Ano
  • 53.8% (Neutral)
  • Newbie Topic Starter
2019-11-04T10:13:55Z
After the new update i get the error " Error whle Processing -Ref: 848- .
I do not know what this error means .
best regards Chris
Autohex_II_BMW
2019-11-05T06:23:20Z
Originally Posted by: Ano 

After the new update i get the error " Error whle Processing -Ref: 848- .
I do not know what this error means .
best regards Chris



does the ECU working on car?
Ano
  •  Ano
  • 53.8% (Neutral)
  • Newbie Topic Starter
2019-11-05T15:18:05Z
Hi,
this was my test ecu for reading and writing so no car available but diagnostic wise it is ok and seems to be not flashed before i got it and opened.
best regads Chris
Autohex_II_BMW
2019-11-06T05:55:56Z
Originally Posted by: Ano 

Hi,
this was my test ecu for reading and writing so no car available but diagnostic wise it is ok and seems to be not flashed before i got it and opened.
best regads Chris



If it was simos 18 as we said some of them need more calculations sir,it will be fixed in near future.
Autohex_II_BMW
2019-11-10T11:22:12Z
Originally Posted by: Ano 

Hello,
i have tried to read my Simos 18.1 Seat ecu and Hextag is stuck at the unlocking process so i have the log file if needed.
I know it is beta right now so any help would be appreciated.
The rest is working fine so service mode is working on EDC17C74 and MED17.1.1 and BMW of course also.
best regards Chris
 Tricore_18.zip You have insufficient rights to see the content.



Can you please update your hextag software and try to read it.if still facing similar issue please arrange teamviewer for us to test,please contact us in skype or whatsapp.
Ano
  •  Ano
  • 53.8% (Neutral)
  • Newbie Topic Starter
2019-11-10T17:43:37Z
Sorry for the late reply but it works the unlocking took about 2 min and i was patient for waiting like the last time .
It reads right now so problem is after updating solved !
If you need this logfile for further improvement give me a message :)
best regards Chris
Autohex_II_BMW
2019-11-11T06:44:13Z
Originally Posted by: Ano 

Sorry for the late reply but it works the unlocking took about 2 min and i was patient for waiting like the last time .
It reads right now so problem is after updating solved !
If you need this logfile for further improvement give me a message :)
best regards Chris



no need logfile sir it has been resolved thank you for your feedback.
Ano
  •  Ano
  • 53.8% (Neutral)
  • Newbie Topic Starter
2019-11-12T13:37:17Z
After readout i get only 3mb file size which should be higher .
After writing the file back into the ecu i got at 83 percent the massage "completed!" but for reading 100 .
Is it possible to get a full readout for this ecu not partially only ?
 Simos18_3MB_FILE.JPG You have insufficient rights to see the content.