BCODING
  •  BCODING
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-12-16T19:06:16Z
hi guys

one customer use cgdi for make key on e92 with cas 3++. ( 9395657 )
my customer after downgrade cas is dead
i have change cas ( 9147220 ) with hextag
change vin ok
change isn ok
change odometer ok
car start ok / unlock and lock car ok
i have problem impossible coding / flash and red dot show on cluster.

best regard
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

hojo29
2019-12-16T19:35:24Z
If the red dot lights up in the instrument cluster, the KM position is incorrect or the VIN does not fit.
Cas can be encoded with NCS.
BCODING
  •  BCODING
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-12-16T20:14:14Z
Impossible coding with ncs
Fa write ok
Read file ok
Reset sg codieren no
I have red dot and show abs dsc défault on kombi
hojo29
2019-12-16T23:38:28Z
CAS coding is only possible if the VIN is correct.
Check CAS vin with Inpa or Tool32.
Or send EEprom from current CAS
BCODING
  •  BCODING
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-12-16T23:46:21Z
 EEP_P064827_MODED_TEST_2.rar You have insufficient rights to see the content.

I understand, check my eeprom please for me my eeprom vin is good.
i check in inpa vin show YYYYYYYYYY 😞 open my eeprom vin is correct
Autohex_II_BMW
2019-12-17T06:18:15Z
Originally Posted by: BCODING 

hi guys

one customer use cgdi for make key on e92 with cas 3++. ( 9395657 )
my customer after downgrade cas is dead
i have change cas ( 9147220 ) with hextag
change vin ok
change isn ok
change odometer ok
car start ok / unlock and lock car ok
i have problem impossible coding / flash and red dot show on cluster.

best regard



when cas is dead after downgrade you can fix the original data itself with the help of Autohex/Hextag.Please contact support for more information.anyway i have attached steps for replacing CAS with used one also.
The normal steps for the replacement of CAS (when original CAS is dead)
1. Get a working CAS with valid key
2. Read DME ISN and write it to CAS
3. Restore FA from LM to CAS from FA manager
4. Change VIN for CAS from advanced option in CAS replacement
5. GO back to the main menu in software
6. Start again with coding/programing
7. DO coding for CAS
BCODING
  •  BCODING
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-12-17T10:18:39Z
Thank you for Help

I dont have autohex
I have only hextag and soft bmw ( ncs ....)
Autohex_II_BMW
2019-12-17T14:26:22Z
Originally Posted by: BCODING 

Thank you for Help

I dont have autohex
I have only hextag and soft bmw ( ncs ....)



load all original data to casin hextag then read eeprom in hextag and check on edit option if cas in programming mode or normal mode,if in programming mode change to normal and write eeprom back to cas.also change the flash file for cas.if you can contact us on skype we can give you another flash file.all t
hojo29
2019-12-17T21:51:52Z
VIN : WBAWD51090P064827
If the VIN is correct, something is wrong with the EEprom or the Flash. Test another dump and replay EEprom and Flash.
Change Key, Vin and ISN.
You can also flash the whole thing again with Winkfp.
BCODING
  •  BCODING
  • 53.2% (Neutral)
  • Newbie Topic Starter
2019-12-18T00:22:37Z
Hi guys

Thank you for your Help.

Car is finish, so happy

I prepared one cas with new dump and key original.

I have change vin and isn dde with hextag without change Checksum for vin.
Coding with ncs expert and calibration dsc.

Full functional with add 2 keys

Thank you

Best regard