1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. BMW Locksmith
  4. All Keys lost F01 MSD85 CAS4
MBB
  •  MBB
  • 54.4% (Neutral)
  • Newbie Topic Starter
2020-03-08T04:43:08Z
Is it possible to do all keys lost on 2010 750i? I have Autohex and HexProg with blank 315 remotes. Also reading ISN on bench for DME then unlocking CAS4 would be the process?
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2020-03-08T05:25:07Z
Originally Posted by: MBB 

Is it possible to do all keys lost on 2010 750i? I have Autohex and HexProg with blank 315 remotes. Also reading ISN on bench for DME then unlocking CAS4 would be the process?



hi,
it will be CAS4 EWS 5 NOT ACTIVE so you don't need ISN for programming key.go to CAS firmware option OBD and try to unlock CAS in some case there are chances CAS not supported if 1L15Y MASK as it is 2010 car it can be that. so if you are getting a message cas needs to be updated even after programming it on indiv programming then you need to do the old method by reading D-flash/EEPROM in Hextag.
MBB
  •  MBB
  • 54.4% (Neutral)
  • Newbie Topic Starter
2020-03-08T05:42:20Z
Thank you for reply. What about if it needs to be performed on Bench? Can this be achieved?
Autohex_II_BMW
2020-03-08T10:46:54Z
Originally Posted by: MBB 

Thank you for reply. What about if it needs to be performed on Bench? Can this be achieved?



you need any zgw if you want to do it on bench.
 ZGW&CAS4&enet.jpg You have insufficient rights to see the content.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. BMW Locksmith
  4. All Keys lost F01 MSD85 CAS4