Hello,

I'm working on f25 which was on fire.

I need to replace the KOMBI. I read the 160D0WT and can only find one short VIN in location 710.

Do I still need to delete it from other locations such as

(a) Replace (not insert !!!) byte 70 0F (1 pair) with "FF" (long
VIN)
(b) Replace all bytes from 80 00 to 80 0F (the whole line) with
"FF" (long VIN)
(c) Replace bytes 590 0E and 590 0F (2 pairs) with "FF" (short
VIN)
(d) Replace bytes 5A0 00 to 5A0 04 (5 pairs) with "FF" (short
VIN)

Thanks

hello
check on your cluster have eeprom 95320 also if yes you need to edit VIN on both. Mileage is stored in 160DW and VIN is stored on both you need to use some Hexedit software or can send file to support team to edit the VIN.

hello
check on your cluster have eeprom 95320 also if yes you need to edit VIN on both. Mileage is stored in 160DW and VIN is stored on both you need to use some Hexedit software or can send file to support team to edit the VIN.

Is it procedure same with 320I F30 series?

Thanks in advanced .

---

yes cluster vin and mileage editing will be same procedure if replacing cluster.