I wanted to clone a BDC today and connected it according to the circuit diagram. The Autohex device got warm on the underside and the adapter cable got warm at the plug. Both smelled a bit scorched. I opened the Autohex device and component Z8 on the board layout was burned. I also opened the FEM/BDC adapter cable and here component D5 on the board layout is burned.
Ask for help from Autohex or a user from the forum what can be done here.
Because I need the device urgently.
Autohex device is still recognizable and I don't see any damage to the circuit board myself.
Danks
20220907_195856.jpg You have insufficient rights to see the content.
20220907_195924.jpg You have insufficient rights to see the content.