1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II Ecu Flashing/Coding
  4. FEM SO8 CLIP.
Mantelele
2021-02-03T17:46:25Z
Hi everyone, another day another challenge.
When i try to unlock fem, and i have to connect SO8 clip, all the time it says that its not connected properly (BAD CONECTION). I did everything i could, scraped the eeprom, cleaned it, nothing helps. Any ideas ? Any help appreciated.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

BMWZG
  •  BMWZG
  • 100% (Exalted)
  • Advanced Member
2021-02-04T06:38:39Z
Maybe it's turned 180 degrees ...
koanga
2021-02-20T18:15:40Z
same issues here, I even remove the chip from the board and nothing. I owned autohex2 for 12h and I`m sending it back, it`s useless for the price that I`ve payed.
https://ibb.co/gDD4QXn 
https://ibb.co/9yp9LZr 
https://ibb.co/rwJJMqv 
CipiCip
2021-02-20T19:24:38Z
Is the first time when you try to unlock a FEM module? And when i say first time i dont mean with autohex...i mean with other tools also
koanga
2021-02-21T00:16:51Z
Originally Posted by: CipiCip 

Is the first time when you try to unlock a FEM module? And when i say first time i dont mean with autohex...i mean with other tools also



Yes, first time, this why I end up buying the autohex, ... your question is not relevant
Autohex_II_BMW
2021-02-21T06:09:20Z
hi,
please contact support on skype or whatsapp if you have issue still let the tech team check for you.
skype : microtronik@outlook.com
whatsapp : +971 55 582 7622
CipiCip
2021-02-21T16:29:50Z
Is very relevant...because you start accusing that the tool is the problem and you will ask for refund and others
I bet you are the problem
Doing 1st time FEM...the tool is fine...believe me
koanga
2021-02-21T20:19:37Z
Originally Posted by: CipiCip 

Is very relevant...because you start accusing that the tool is the problem and you will ask for refund and others
I bet you are the problem
Doing 1st time FEM...the tool is fine...believe me




Problem is the tool this why after they remote in Ithey have me send in back, Sit down next time, and just read the comments, your opinion is irrelevant
cardiagcom
2021-02-25T17:43:04Z
Originally Posted by: koanga 

Originally Posted by: CipiCip 

Is very relevant...because you start accusing that the tool is the problem and you will ask for refund and others
I bet you are the problem
Doing 1st time FEM...the tool is fine...believe me




Problem is the tool this why after they remote in Ithey have me send in back, Sit down next time, and just read the comments, your opinion is irrelevant



Did you read successfully your BDC with other tools??? I personally read FEM but no BDC (because still no come to any car with BDC) some NEW BDC like G series is no chance to make key
koanga
2021-02-25T20:52:11Z
[qoute]Did you read successfully your BDC with other tools??? I personally read FEM but no BDC (because still no come to any car with BDC) some NEW BDC like G series is no chance to make key



No, I haven`t, this why I end up geting autohex, I was hope to have one tool that does it all, the BDC is from an F15 2015. So, not that new.
CipiCip
2021-02-26T18:41:35Z
First off all F10 doenst have bdc...and like i sayd you dont have ideea about what you are speaking about....only f15 f16 have bdc...f30 f20 have fem and f10 f01 have CAS
YOU ARE THE PROBLEM
koanga
2021-02-26T20:03:27Z
Originally Posted by: CipiCip 

First off all F10 doenst have bdc...and like i sayd you dont have ideea about what you are speaking about....only f15 f16 have bdc...f30 f20 have fem and f10 f01 have CAS
YOU ARE THE PROBLEM



I got more than one car, it’s F15, I did a typo, but you? Still irrelevant.

Also, does with brain can coupe that the device was shorted out at the 8clip? What’s wrong with you?
CipiCip
2021-02-26T20:46:17Z
With me is nothing wrong...
I dont have any BMW F10 with BDC
koanga
2021-02-26T21:04:52Z
Originally Posted by: CipiCip 

With me is nothing wrong...
I dont have any BMW F10 with BDC



You just like to show off and talk $hit I guess, take my advice and stop posting if you don’t have anything intelligent to write. You might be confusing this forum with Facebook.

CipiCip
2021-02-27T04:15:32Z
You cant give me advices...you are a baker...have you figured out what ex-flash contain?
So...dont give advice.
And dont write in this forum that the the tool is useless for the price that you payd
koanga
2021-02-27T13:09:43Z
Originally Posted by: CipiCip 

You cant give me advices...you are a baker...have you figured out what ex-flash contain?
So...dont give advice.
And dont write in this forum that the the tool is useless for the price that you payd



What? Don’t type angry...

Findlaybum
2021-02-27T16:07:55Z
Come on gentlemen ... have a cup of tea .. or coffee for that matter ..

Tam
OFFICIAL FRIEND OF OFFICIAL AUTOHEX II PARTNER .. AND OFFICIAL FRIEND OF THE BOSS .:)
Autohex_II_BMW
2021-02-28T06:31:14Z
hi,
please keep in mind that not everyone is ace in everything, and our intention in this forum to pass the knowledge and info which in known to help the fellow mates. so we request everyone to respect each other and avoid abusive comments while using forum as per our policies. so please keep everyone a friendly atmosphere and help each other as like we done till now.
Thank you for your cooperation.
koanga
2021-03-03T20:34:37Z
Received the replacement autohex and everything works now, apparently the cable was bad.
Autohex_II_BMW
2021-03-04T07:05:52Z
Originally Posted by: koanga 

Received the replacement autohex and everything works now, apparently the cable was bad.



we apologize for the trouble caused, hope things are fine for you now.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. Autohex II BMW
  3. Autohex II Ecu Flashing/Coding
  4. FEM SO8 CLIP.