BMW 535i GT 2010 CAS4 bricked during update programming, HELP· Page 2 · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

miksonics
65.2% (Friendly)
Member Topic Starter

2018-05-13T08:30:27Z

In my old dump the 2 keys still starts the car and drive only switch of after a minute or 2, but keys still works, tried to virgin keys with vvdi prog, keys still shows no blank on Htag pro

AUTOHEX_BMW
100% (Exalted)
Advanced Member

2018-05-13T09:52:38Z

Yes, make one key with vvdi, with dumps from me, in htag all key show no blank. On F10 programming key on emergency coil near steering column. If you put new or renew key in htag while programming, is says is not blank

miksonics
65.2% (Friendly)
Member Topic Starter

2018-05-13T22:26:33Z

I made key but car will not start, complain of EWS tampering, maybe ISN issues

AUTOHEX_BMW
100% (Exalted)
Advanced Member

2018-05-14T05:11:48Z

You can now put ignition with new dump and new key?

miksonics
65.2% (Friendly)
Member Topic Starter

2018-05-14T05:25:59Z

Yes, ignition come up but car will crank but not start tell me ews tampering

AUTOHEX_BMW
100% (Exalted)
Advanced Member

2018-05-14T05:45:03Z

Read isn from wcu in boot mode with AH, and give me. You have ews5 active.

Similar Topics

BMW M6 2013 bricked help!! (Autohex II Ecu Flashing/Coding) by wielandgeorg 2020-04-19T08:22:57Z
BMW F10 (2010) CAS4 swap (Autohex II DME/DDE and CAS ISN) by Autohex_II_BMW 2018-08-29T03:25:20Z
2010 bmw 535i Firmaware failed when try copy ISN. (Autohex II DME/DDE and CAS ISN) by Autohex_II_BMW 2021-09-14T22:33:35Z
Damaged cas3 during programming (BMW Locksmith) by Willisodhiambo 2020-05-22T00:53:25Z
2010 BMW 740LI DME MSD87.2 NEED HELP FOR CLONING (Autohex II Ecu Flashing/Coding) by Autohex_II_BMW 2024-09-25T07:48:37Z

Users browsing this topic

Guest (7)