javorkrustev
2020-01-10T12:45:41Z
Hello mates, i have issue after damaged DDE replacement. I reset ISN in CAS only and after that the car was perfect. They drive the car 1000km without any issues. After that replace the battery and the car wont shift gear. Starts and record " EGS immobilizer in transmission control disables.
Any idea for next step? And why it happend after 2 weeks and battery replacement?
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Levanime
2020-01-11T03:11:56Z
thats weird

it more looks like customer is not saying full truth
Autohex_II_BMW
2020-01-11T09:35:17Z
Originally Posted by: javorkrustev 

Hello mates, i have issue after damaged DDE replacement. I reset ISN in CAS only and after that the car was perfect. They drive the car 1000km without any issues. After that replace the battery and the car wont shift gear. Starts and record " EGS immobilizer in transmission control disables.
Any idea for next step? And why it happend after 2 weeks and battery replacement?


it was egs lost ews sync after battery replacement, please sync egs again and disconnect battery negtive and check if loosing sync again, if yes please contact tech support they will help you.
javorkrustev
2020-01-11T21:22:21Z
I will try and report, thank you
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member
2020-01-17T04:03:18Z
I think you better off not touching the CAS ISN when replacing the DME. It is easier change it in DME and avoid transmission issues.
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2020-01-17T22:44:29Z
Please do the following:
Don’t leave the ISN in cas like this: 00 00 xx xx
The first 2 hex numbers in isn should not be zeros.
If you left them zeros you will always lose the sync after disconnecting the battery.
javorkrustev
2020-01-17T22:49:34Z
I just use CAS DME ISN manager. i dont know how looks ISN in CAS. Copy isn from the new DDE and load in CAS. how to protect myself and what to do to prevent it from happening again?
Admin
  •  Admin
  • 100% (Exalted)
  • Administration
2020-01-18T11:52:40Z
- Fill two random hex numbers in the CAS ISN, example 56 44 XX YY, where XX YY are the DDE ISN
- Reset the EGS EWS from ISN Manager again.
This will solve your issue for good