I need assistance with unlocking this fem. I went to unlock it and it informed me the ecu needs updating. I first went to coding and updated the fem body there it seemed to do the encoding process fine. i went back to unlock the fem but still said ecu needs updating. Then i went into programming and there were 2 available updates. The first was fem gw and the second was fem body. It said it updated fem gw then I went to fem body but after a few seconds it gives an error. "module rejecting to switch to required mode reference 830c" I am wondering if me going to coding first caused this problem or am I doing something wrong? Anyway to correct this issue? Thanks
 IMG_0621.jpg You have insufficient rights to see the content. IMG_0622.jpg You have insufficient rights to see the content. IMG_0623.jpg You have insufficient rights to see the content. IMG_0624.jpg You have insufficient rights to see the content. IMG_0625.jpg You have insufficient rights to see the content. IMG_0626.jpg You have insufficient rights to see the content. IMG_0627.jpg You have insufficient rights to see the content. IMG_0628.jpg You have insufficient rights to see the content. IMG_0629.jpg You have insufficient rights to see the content. IMG_0630.jpg You have insufficient rights to see the content.

Just wanted to add it never asks me for ISN when it starts the unlock procedure. Is this normal?

I need assistance with unlocking this fem. I went to unlock it and it informed me the ecu needs updating. I first went to coding and updated the fem body there it seemed to do the encoding process fine. i went back to unlock the fem but still said ecu needs updating. Then i went into programming and there were 2 available updates. The first was fem gw and the second was fem body. It said it updated fem gw then I went to fem body but after a few seconds it gives an error. "module rejecting to switch to required mode reference 830c" I am wondering if me going to coding first caused this problem or am I doing something wrong? Anyway to correct this issue? Thanks
 IMG_0621.jpg You have insufficient rights to see the content. IMG_0622.jpg You have insufficient rights to see the content. IMG_0623.jpg You have insufficient rights to see the content. IMG_0624.jpg You have insufficient rights to see the content. IMG_0625.jpg You have insufficient rights to see the content. IMG_0626.jpg You have insufficient rights to see the content. IMG_0627.jpg You have insufficient rights to see the content. IMG_0628.jpg You have insufficient rights to see the content. IMG_0629.jpg You have insufficient rights to see the content. IMG_0630.jpg You have insufficient rights to see the content.

please contact support they will resolve the issue for you.this happen because this fem need ignition for update fem body that's why it throw up that error.support has a solution for this you can contact them.

Thank you Autohex support fixed it right away. Will there be an update to correct this in the future?

Thank you Autohex support fixed it right away. Will there be an update to correct this in the future?

if you get this error you need to contact support for programmig and unlocking fem.Mostly happens on manual car

Is there anyway to know this will happen before removing fem ?

Yea in case after working hours or Friday.

Is there anyway to know this will happen before removing fem ?

if you got car then you can try to update it on car itself before removing it.

I always update on the car first.

I always update on the car first.

you can do the update on bench also without any issue

Got the same issue Autohex support is offline for two days. Client is waiting.
Has anyone got a solution please?

Did you update in the car? Doing this on the bench?

All sorted. Thank you for quick help Autohex support!

can you tell what the remedy was?

can you tell what the remedy was?

for the 830C error for FEM body programming always contact us.