Any issues with Mercedes EDC17CP46 Cloning ??? I see there is 2 Mercedes EDC17CP46 choices in Hextag. I read original and write to a replacement no problem and can read back from the replacement but no communication with scan tool and no start of course.

Any issues with Mercedes EDC17CP46 Cloning ??? I see there is 2 Mercedes EDC17CP46 choices in Hextag. I read original and write to a replacement no problem and can read back from the replacement but no communication with scan tool and no start of course.

are you sure no communication OBD?

Yes, stuck in boot mode.

Yes, stuck in boot mode.

did you try to program it.

Hi

For mb ecu_s:

ecu edc17cp46 is not clonable, same BOSCH : edc17c66/84...edc17cp46/57/60 ....ME 17.7....MED17.7.2/MED17.7.5 !

If I'm wrong, have someone who already does this correct me !

Posible.... only edc17c42/43...edc17cp01/10...me17.7.8/med17.7.1/med17.7.3/med17.7.3.1/med17.7.7

Hi

For mb ecu_s:

ecu edc17cp46 is not clonable, same BOSCH : edc17c66/84...edc17cp46/57/60 ....ME 17.7....MED17.7.2/MED17.7.5 !

If I'm wrong, have someone who already does this correct me !

Posible.... only edc17c42/43...edc17cp01/10...me17.7.8/med17.7.1/med17.7.3/med17.7.3.1/med17.7.7

You mean w HexProg or any tool ???
I did read / write MED17.7.2 / MED17.7.3 / MED17.7.5 but tuning not cloning to another ECU.

The EDC17CP46 has 2 variants, with and without tuning protection. There is also 2 different variants, CR60.20 and CR60.30. One used on Sprinter and another passenger cars. I've done the Sprinter ones fro AdBlue and tuning. The one for cars was able to read but cloning not tested 100%. I have more time now. I got 2 of these ECUs to play with. So I'll try again.