Hi!
After i've updated sw and fw of hextag at version 1.028 it cannot erase first two lines of incremental eeproms from bmw kombi clusters( 35080 , 080dwq , 35160dwoq etc) . also i've noticed that i get random readings of 92s12 5m48h and 1N35h from cas4 modules. read after read it is reading different content of dfash. i will make another test with cas3 and cas2 to see if the problems persist. untill i've updated hextag , it worked flawlessly . i've redone the soldering accoriding to connection diagram at leat 10 times so it is not a connection issue. any advice it will be apreciated!

I was having some weird stuff happening with both hextag and autohex. I uninstalled both with revo uninstaller. reinstalled and now working perfect. but this also happened after installing some other programs in the same laptop. You might want to try that.

Hi!
After i've updated sw and fw of hextag at version 1.028 it cannot erase first two lines of incremental eeproms from bmw kombi clusters( 35080 , 080dwq , 35160dwoq etc) . also i've noticed that i get random readings of 92s12 5m48h and 1N35h from cas4 modules. read after read it is reading different content of dfash. i will make another test with cas3 and cas2 to see if the problems persist. untill i've updated hextag , it worked flawlessly . i've redone the soldering accoriding to connection diagram at leat 10 times so it is not a connection issue. any advice it will be apreciated!

we recommend you to contact via skype or WhatsApp on below details for more convenience.
Skype: [email protected]
WhatsApp: +971555827622