1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Cannot Read Key Pages.
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member Topic Starter
2022-03-27T20:32:32Z
Hello, I used to use HexTag for quick ISN or SK change in the past but recently it gives me the "Cannot Read Key Pages" error. Anyone has a solution? Is it software, hardware issue?

Thank you.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Autohex_II_BMW
2022-03-28T08:23:20Z
Originally Posted by: abc123 

Hello, I used to use HexTag for quick ISN or SK change in the past but recently it gives me the "Cannot Read Key Pages" error. Anyone has a solution? Is it software, hardware issue?

Thank you.



hello
yes we are working on this issue have seen this error commonly recently will try to fix it by next update. If you have autohex you can read ISN on bench CAS connect to autohex and any key slot from E series to CAS.  HW4 CAS3.png You have insufficient rights to see the content. Key slot.jpg You have insufficient rights to see the content.
Autohex_II_BMW
2022-04-15T05:33:17Z
Originally Posted by: abc123 

Hello, I used to use HexTag for quick ISN or SK change in the past but recently it gives me the "Cannot Read Key Pages" error. Anyone has a solution? Is it software, hardware issue?

Thank you.



hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.
CipiCip
2022-04-18T06:42:25Z

hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.



It's not working version 1.0.50 on hextag
Tested
Autohex_II_BMW
2022-04-18T07:32:15Z
Originally Posted by: CipiCip 


hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.



It's not working version 1.0.50 on hextag
Tested



thank you for the feedback sir.
CipiCip
2022-04-18T20:12:34Z
Originally Posted by: Autohex_II_BMW 

Originally Posted by: CipiCip 


hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.



It's not working version 1.0.50 on hextag
Tested



thank you for the feedback sir.


You are welcome
Hope that on 1.0.51 this function will work
And also i ask again for 35160wt and 35128wt clusters eeprom

Autohex_II_BMW
2022-04-19T06:50:37Z
Originally Posted by: CipiCip 

Originally Posted by: Autohex_II_BMW 

Originally Posted by: CipiCip 


hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.



It's not working version 1.0.50 on hextag
Tested



thank you for the feedback sir.


You are welcome
Hope that on 1.0.51 this function will work
And also i ask again for 35160wt and 35128wt clusters eeprom


sorry eeprom cannot be added now its on hold due to technical difficulties. We have checked again the key decrypt strange its working for us. Can you delete your databased on hexprog make new update and test again the function.
you can delete from this location
C:\Program Files (x86)\Microtronik\HexProg\Data
CipiCip
2022-04-21T07:04:37Z
Originally Posted by: Autohex_II_BMW 

Originally Posted by: CipiCip 

Originally Posted by: Autohex_II_BMW 

Originally Posted by: CipiCip 


hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.



It's not working version 1.0.50 on hextag
Tested



thank you for the feedback sir.


You are welcome
Hope that on 1.0.51 this function will work
And also i ask again for 35160wt and 35128wt clusters eeprom


sorry eeprom cannot be added now its on hold due to technical difficulties. We have checked again the key decrypt strange its working for us. Can you delete your databased on hexprog make new update and test again the function.
you can delete from this location
C:\Program Files (x86)\Microtronik\HexProg\Data


Sir,we already know that is on hold due to technical difficulties since 2 years ago....but 2 years on hold is a very long time
Autohex_II_BMW
2022-04-22T07:52:19Z
we really understand your concern sir and sorry for the delay, but unfortunately there is no forecast on this eeprom function when we can add it for now.
Autohex_II_BMW
2022-04-22T13:36:47Z
Originally Posted by: CipiCip 

Originally Posted by: Autohex_II_BMW 

Originally Posted by: CipiCip 

Originally Posted by: Autohex_II_BMW 

Originally Posted by: CipiCip 


hello
can you make sure you are on latest version of hexprog 1.0.50 , because we do test here on both hextag and hexprog to decrypt with key and its working without any trouble. So please do test key again.



It's not working version 1.0.50 on hextag
Tested



thank you for the feedback sir.


You are welcome
Hope that on 1.0.51 this function will work
And also i ask again for 35160wt and 35128wt clusters eeprom


sorry eeprom cannot be added now its on hold due to technical difficulties. We have checked again the key decrypt strange its working for us. Can you delete your databased on hexprog make new update and test again the function.
you can delete from this location
C:\Program Files (x86)\Microtronik\HexProg\Data


Sir,we already know that is on hold due to technical difficulties since 2 years ago....but 2 years on hold is a very long time



did you test key decryption after deleting file from that data folder and making update for hexprog software?
CipiCip
2022-04-25T09:34:04Z
i will post feedback after testing cas3 key decryption
i dont have any cas3 now
applerallph
2022-04-27T10:10:34Z
CAS3+ tested HEXTAG hexprog version 1.0.50 software cant decrypt CAS CANNOT READ KEY PAGES 😢
LasoGarage
2022-04-27T10:38:53Z
Yes. I have same problem
jaramillo
2022-05-13T20:32:32Z
I have same issue, @Autohex, do you know when this is going to be solved?
Autohex_II_BMW
2022-05-14T06:16:39Z
Please delete data from this folder location and try again please because its working here we have tested it. let us know the reuslts.
C:\Program Files (x86)\Microtronik\HexProg\Data
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member Topic Starter
2022-05-16T01:25:14Z
Resolder the antenna connection inside HexProg. That was the issue.

Regards.
Autohex_II_BMW
2022-05-16T11:46:04Z
we found the issue , to decrypt eeprom with key there is bug when you read file from CAS and click on edit direct you get that error, instead of that you just need to save the file and load the eeprom file then do the decryption it will work.
we will try to correct it on coming update.
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member Topic Starter
2022-05-16T19:45:19Z
That Autohex ISN reading on the bench with the key slot never worked for me. Is there any trick to do this?

Firmware has to be downgraded?
Autohex_II_BMW
2022-05-17T05:35:02Z
what error you got ?
abc123
  •  abc123
  • 100% (Exalted)
  • Advanced Member Topic Starter
2022-05-21T00:18:59Z
CAS3 has to be downgraded, then OK. Not downgraded, no read, no error.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Cannot Read Key Pages.