Problem with reading ecu Bosch EDC17CP45 factory mode · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

Bartas222
53.2% (Neutral)
Newbie Topic Starter

2021-04-23T12:24:12Z

Hey, I have a problem with reading the ECU EDC17CP45 in factory mode.
This mode worked because I already read the same ECU in this way. I am asking for some help. Since boot mode reading is very difficult in this ecu processed-5.jpg.jpeg You have insufficient rights to see the content. processed-4.jpg.jpeg You have insufficient rights to see the content.

Sponsor

Start Ecu Tuning today with Hexprog II Basic Set, all from an incredible price: ONLY USD 575.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

BMWZG
100% (Exalted)
Advanced Member

2021-04-23T14:09:13Z

I had some problems with wirings from Power module to ECU and exactly conectors in Power Module. Check this and all will work. The power module is a good solution, but unfortunately it has poor cable connectors.

Autohex_II_BMW
100% (Exalted)
Advanced Member

2021-04-24T06:01:20Z

Originally Posted by: Bartas222

Hey, I have a problem with reading the ECU EDC17CP45 in factory mode.
This mode worked because I already read the same ECU in this way. I am asking for some help. Since boot mode reading is very difficult in this ecu processed-5.jpg.jpeg You have insufficient rights to see the content. processed-4.jpg.jpeg You have insufficient rights to see the content.

we hope its working now.

Bartas222
53.2% (Neutral)
Newbie Topic Starter

2021-04-25T10:34:27Z

This is how the problem works was exactly as the colleague described above.