Sometimes only option is to take another good DME and clone it using hexprog to your DME. Then go back and change ISN / VIN and continue on with whatever modification you were doing.

Sometimes only option is to take another good DME and clone it using hexprog to your DME. Then go back and change ISN / VIN and continue on with whatever modification you were doing.

wrong, continental ecu dont work like this, Support will confirm this, once ecu password is lost, there is no way to fix it unless you have original file from ecu with password inside

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

i already do have a donor, same software etc
can someone make a step by step post so i know what to do plz

what else i need then cas and ecu so i can make a setup on bench

after coding does the car need to be updated online for best resuld?

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

i already do have a donor, same software etc
can someone make a step by step post so i know what to do plz

what else i need then cas and ecu so i can make a setup on bench

after coding does the car need to be updated online for best resuld?

hello
You can replace donor ECU in autohex can do OBD or on bench. If you read doing OBD just read ISN from donor DME and write to CAS then do coding for DME.
If you want to do on bench you please read original CAS ISN using attached connect with key slot and insert working key to read CAS ISN from ISN manager option2. you can write this CAS ISN to donor DME from ON BENCH--->MSX8X ISN option use same MSD80 option (wiring diagram available in software itself).For more details you can contact support also.  Key slot.jpg You have insufficient rights to see the content. HW4 CAS3.png You have insufficient rights to see the content.

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

i already do have a donor, same software etc
can someone make a step by step post so i know what to do plz

what else i need then cas and ecu so i can make a setup on bench

after coding does the car need to be updated online for best resuld?

hello
You can replace donor ECU in autohex can do OBD or on bench. If you read doing OBD just read ISN from donor DME and write to CAS then do coding for DME.
If you want to do on bench you please read original CAS ISN using attached connect with key slot and insert working key to read CAS ISN from ISN manager option2. you can write this CAS ISN to donor DME from ON BENCH--->MSX8X ISN option use same MSD80 option (wiring diagram available in software itself).For more details you can contact support also.  Key slot.jpg You have insufficient rights to see the content. HW4 CAS3.png You have insufficient rights to see the content.

ok thanks, so key, cas and ecu thats all or also a JBE or KGM, i have bench harnas incl key reader
so if i do "bench reading" so isn from cas to ecu and write isn

what about vin and houres in donor ecu after isn writing?

and after "bench"isn programmig do i need to update ecu online or something?

sorry fro the questions but if i do mostly vag cars this if new for me

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

i already do have a donor, same software etc
can someone make a step by step post so i know what to do plz

what else i need then cas and ecu so i can make a setup on bench

after coding does the car need to be updated online for best resuld?

hello
You can replace donor ECU in autohex can do OBD or on bench. If you read doing OBD just read ISN from donor DME and write to CAS then do coding for DME.
If you want to do on bench you please read original CAS ISN using attached connect with key slot and insert working key to read CAS ISN from ISN manager option2. you can write this CAS ISN to donor DME from ON BENCH--->MSX8X ISN option use same MSD80 option (wiring diagram available in software itself).For more details you can contact support also.  Key slot.jpg You have insufficient rights to see the content. HW4 CAS3.png You have insufficient rights to see the content.

ok thanks, so key, cas and ecu thats all or also a JBE or KGM, i have bench harnas incl key reader
so if i do "bench reading" so isn from cas to ecu and write isn

what about vin and houres in donor ecu after isn writing?

and after "bench"isn programmig do i need to update ecu online or something?

sorry fro the questions but if i do mostly vag cars this if new for me

no need jbe or any other control , just need dme,cas and key. to changing VIN on donor ECU you need to do coding for DME. if you want to do on bench coding you need to connect DME and CAS together on bench. Use this connection for DME to code it on bench along with CAS. its different wiring from ON BENCH-->MSX8X ISN option.
 HW4 MSV80.png You have insufficient rights to see the content.

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

i already do have a donor, same software etc
can someone make a step by step post so i know what to do plz

what else i need then cas and ecu so i can make a setup on bench

after coding does the car need to be updated online for best resuld?

hello
You can replace donor ECU in autohex can do OBD or on bench. If you read doing OBD just read ISN from donor DME and write to CAS then do coding for DME.
If you want to do on bench you please read original CAS ISN using attached connect with key slot and insert working key to read CAS ISN from ISN manager option2. you can write this CAS ISN to donor DME from ON BENCH--->MSX8X ISN option use same MSD80 option (wiring diagram available in software itself).For more details you can contact support also.  Key slot.jpg You have insufficient rights to see the content. HW4 CAS3.png You have insufficient rights to see the content.

ok thanks, so key, cas and ecu thats all or also a JBE or KGM, i have bench harnas incl key reader
so if i do "bench reading" so isn from cas to ecu and write isn

what about vin and houres in donor ecu after isn writing?

and after "bench"isn programmig do i need to update ecu online or something?

sorry fro the questions but if i do mostly vag cars this if new for me

no need jbe or any other control , just need dme,cas and key. to changing VIN on donor ECU you need to do coding for DME. if you want to do on bench coding you need to connect DME and CAS together on bench. Use this connection for DME to code it on bench along with CAS. its different wiring from ON BENCH-->MSX8X ISN option.
 HW4 MSV80.png You have insufficient rights to see the content.

and working hours reset?
i will get cas and key in 2 days so i did not look in software for this specific reset

yes ecu is not worth wasting time with now

MSD81.2 is a relatively cheap ecu £40
on ebay, plenty on sale, i would just get another and modify the data to match cas

MSD/MSV can be coded on bench using autohex pinout, support have diagram, im not sure how to attach to this reply so ask support they will give you

this is total 10-15 min job including programming/coding

i already do have a donor, same software etc
can someone make a step by step post so i know what to do plz

what else i need then cas and ecu so i can make a setup on bench

after coding does the car need to be updated online for best resuld?

hello
You can replace donor ECU in autohex can do OBD or on bench. If you read doing OBD just read ISN from donor DME and write to CAS then do coding for DME.
If you want to do on bench you please read original CAS ISN using attached connect with key slot and insert working key to read CAS ISN from ISN manager option2. you can write this CAS ISN to donor DME from ON BENCH--->MSX8X ISN option use same MSD80 option (wiring diagram available in software itself).For more details you can contact support also.  Key slot.jpg You have insufficient rights to see the content. HW4 CAS3.png You have insufficient rights to see the content.

ok thanks, so key, cas and ecu thats all or also a JBE or KGM, i have bench harnas incl key reader
so if i do "bench reading" so isn from cas to ecu and write isn

what about vin and houres in donor ecu after isn writing?

and after "bench"isn programmig do i need to update ecu online or something?

sorry fro the questions but if i do mostly vag cars this if new for me

no need jbe or any other control , just need dme,cas and key. to changing VIN on donor ECU you need to do coding for DME. if you want to do on bench coding you need to connect DME and CAS together on bench. Use this connection for DME to code it on bench along with CAS. its different wiring from ON BENCH-->MSX8X ISN option.
 HW4 MSV80.png You have insufficient rights to see the content.

and working hours reset?
i will get cas and key in 2 days so i did not look in software for this specific reset

you will not get any error for working hours.

Only if power class dont match will cause problems
And if you want to change power class need working hours reset
If you have the same ecu from.the same car with the same power class doesnt matter working hours