E92 m3 edc removal in fa · Microtronik Autohex II and Hexprog forum

Welcome Guest! To enable all features please Login or Register.

RGAUTO
62.6% (Friendly)
Member Topic Starter

2017-04-12T10:29:31Z

Hi I have E92 M3 customer remove shocks and fit aftermarket now central display shows edc failure I remove edc from fa advance then go out and calculate fa again with new session then edc is removed from updatable ecus.
Then I reflash cas and frm but still shows edc fault on centre screen what can I do to remove this permanantly from system

Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

Wanna join the discussion?! Login to your Microtronik Autohex II and Hexprog forum forum account or Register a new forum account

Tombo
66.4% (Friendly)
Member

2017-04-12T16:11:10Z

Code all ecus with modified vo to factory deflaut and everything be ok

Als you can code them to nicht_aktiv
EDCK_ALIVE_ZAEHLER' in KOMBI
'EDC' in CAPPL
And remove edc fuses

Edited by user 2017-04-12T17:33:35Z | Reason: Not specified

https://www.facebook.com/BMPassions

RGAUTO
62.6% (Friendly)
Member Topic Starter

2017-04-12T22:00:23Z

Thanks I will try and report back

RGAUTO
62.6% (Friendly)
Member Topic Starter

2017-04-13T16:31:45Z

Hi all I reflashed all ecus problem still persists removed fuse 23 and 63 for edc but then remote key dont work...so I unplugged edc in the boot and refit fuses...all is well now thanks for your help