Hi,
First time using hexprog and something is wrong.
I solder wires like in diagram, read flash OK, write flash OK. Then I try to read eeprom and everytime I get faild - 943 problem.
After successful write flash I cant read eeprom and flash neither on this same soldering.
I disolder and solder one more time - no luck.

I use another tool and it read and write OK. Where is the problem?

 20191216_104610.jpg You have insufficient rights to see the content. 20191216_104427.jpg You have insufficient rights to see the content. 20191216_104602.jpg You have insufficient rights to see the content.

Is your blue wire bridging the 2 solder points?

Is your blue wire bridging the 2 solder points?

No it isn't. Looking in wiring diagram it should solder only one point...

I can read CAS3 + perfectly with Hexprog.
I don't find the soldering so perfect and I see a lot of flux.
If reading doesn't work right away, I would go to Update and test again.

Hi,
First time using hexprog and something is wrong.
I solder wires like in diagram, read flash OK, write flash OK. Then I try to read eeprom and everytime I get faild - 943 problem.
After successful write flash I cant read eeprom and flash neither on this same soldering.
I disolder and solder one more time - no luck.

I use another tool and it read and write OK. Where is the problem?

 20191216_104610.jpg You have insufficient rights to see the content. 20191216_104427.jpg You have insufficient rights to see the content. 20191216_104602.jpg You have insufficient rights to see the content.

please check your wiring we don't have any issue for reading cas3+ ,please update your Autohex and also try with another laptop.

Hi,
First time using hexprog and something is wrong.
I solder wires like in diagram, read flash OK, write flash OK. Then I try to read eeprom and everytime I get faild - 943 problem.
After successful write flash I cant read eeprom and flash neither on this same soldering.
I disolder and solder one more time - no luck.

I use another tool and it read and write OK. Where is the problem?

 20191216_104610.jpg You have insufficient rights to see the content. 20191216_104427.jpg You have insufficient rights to see the content. 20191216_104602.jpg You have insufficient rights to see the content.

please check your wiring we don't have any issue for reading cas3+ ,please update your Autohex and also try with another laptop.

Hi,

wiring 100% OK. I try 2 different cas3+ and cas2...on every ecu I get faild to unlock Chipset...
I try 2 different power supply - 12V 2A
Hexprog updated to latest version
I write to your web chat, and you advise to me to try read FRM. I bought one for test and will see...

How can I contact technical support dirrectly - no from web chat. Skype, Whatsup, etc?

Hi,
First time using hexprog and something is wrong.
I solder wires like in diagram, read flash OK, write flash OK. Then I try to read eeprom and everytime I get faild - 943 problem.
After successful write flash I cant read eeprom and flash neither on this same soldering.
I disolder and solder one more time - no luck.

I use another tool and it read and write OK. Where is the problem?

 20191216_104610.jpg You have insufficient rights to see the content. 20191216_104427.jpg You have insufficient rights to see the content. 20191216_104602.jpg You have insufficient rights to see the content.

please check your wiring we don't have any issue for reading cas3+ ,please update your Autohex and also try with another laptop.

Hi,

wiring 100% OK. I try 2 different cas3+ and cas2...on every ecu I get faild to unlock Chipset...
I try 2 different power supply - 12V 2A
Hexprog updated to latest version
I write to your web chat, and you advise to me to try read FRM. I bought one for test and will see...

How can I contact technical support dirrectly - no from web chat. Skype, Whatsup, etc?

skype id:microtronik@outlook.com
whatsapp:+971555827622

or just click on logos on top right of website.