1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. BMW DDE EDC17CP09 cloning issues
koanga
  •  koanga
  • 76.6% (Friendly)
  • Member Topic Starter
2020-04-12T15:43:01Z
I`m getting "data verify error ref 964" when cloning the DME, or even when back up & restore (same files) on EX-FLASH.

reading is working fine, but when restore is bricking the DDE!

Data verify Error,Please try again - Ref:964-
-this is in factory mode.
Sponsor

Start ECU Repairing, ECU Cloning, and Chip Tuning today, all from an incredible price of just USD 385.00.

No annual fees, no extra charges: You pay only when you have a job.

Visit Hexprog II page

frick
2020-04-12T16:33:50Z
I'am have this issue also,i'am curious when Autohex will correct this bug because its annoying....
Just for curiosity,what support says about this issue?
They fix this somehow?????????
koanga
  •  koanga
  • 76.6% (Friendly)
  • Member Topic Starter
2020-04-12T16:46:12Z
Originally Posted by: frick 

I'am have this issue also,i'am curious when Autohex will correct this bug because its annoying....
Just for curiosity,what support says about this issue?
They fix this somehow?????????



Just email them, in the mean time the DDE is bricked, having a 2tone paper weight in the driveway, way to go
koanga
  •  koanga
  • 76.6% (Friendly)
  • Member Topic Starter
2020-04-12T21:22:08Z
some info on how to fix this someones is in the same situation, DDE EDC17CP09:
1. open the dde and restore using boot mode
2. use winkpf and flash it
3. use ncs to code it
4. done
Autohex_II_BMW
2020-04-13T06:56:46Z
Originally Posted by: koanga 

I`m getting "data verify error ref 964" when cloning the DME, or even when back up & restore (same files) on EX-FLASH.

reading is working fine, but when restore is bricking the DDE!

Data verify Error,Please try again - Ref:964-
-this is in factory mode.



can you contact support on skype and arrange teamviewer for them.
Milkyway
2020-04-15T08:34:54Z
Hello!

Got the same fault ith an MEVD17.2 from a Mini. The problem is the wrong checksum during the write. I tried to read out the DME with KTAG and saw this error (wrong checksum). When I restore the DME with the original file with KTAG everything is okay.

CU Oliver
Autohex_II_BMW
2020-04-16T06:05:30Z
Originally Posted by: Milkyway 

Hello!

Got the same fault ith an MEVD17.2 from a Mini. The problem is the wrong checksum during the write. I tried to read out the DME with KTAG and saw this error (wrong checksum). When I restore the DME with the original file with KTAG everything is okay.

CU Oliver



yes we are aware of this MEV172 issue,working on it.
STF PERFORMANCE
2020-04-19T00:07:03Z
hey guys,
were you able to sort this just asking as I have 2 here that need cloning?
Regards,
Steve
koanga
  •  koanga
  • 76.6% (Friendly)
  • Member Topic Starter
2020-04-19T00:11:42Z
Originally Posted by: STF PERFORMANCE 

hey guys,
were you able to sort this just asking as I have 2 here that need cloning?
Regards,
Steve



Boot mode works, so you`ll need to open the dde/dme
STF PERFORMANCE
2020-04-19T00:16:44Z
no issues with bricking when writing back mate?
koanga
  •  koanga
  • 76.6% (Friendly)
  • Member Topic Starter
2020-04-19T00:46:53Z
Originally Posted by: STF PERFORMANCE 

no issues with bricking when writing back mate?



no in boot mode, you can use factory mode to read them but use boot mode to write them..


BTW this applies to DDE EDC17CP09 , not sure about other DDE's or DME's
frick
2020-04-19T06:52:38Z
Originally Posted by: Autohex_II_BMW 

Originally Posted by: koanga 

I`m getting "data verify error ref 964" when cloning the DME, or even when back up & restore (same files) on EX-FLASH.

reading is working fine, but when restore is bricking the DDE!

Data verify Error,Please try again - Ref:964-
-this is in factory mode.



can you contact support on skype and arrange teamviewer for them.



Question is if finnaly work CP09 on factory mode or not?
Autohex_II_BMW
2020-04-19T07:45:29Z
Originally Posted by: frick 

Originally Posted by: Autohex_II_BMW 

Originally Posted by: koanga 

I`m getting "data verify error ref 964" when cloning the DME, or even when back up & restore (same files) on EX-FLASH.

reading is working fine, but when restore is bricking the DDE!

Data verify Error,Please try again - Ref:964-
-this is in factory mode.



can you contact support on skype and arrange teamviewer for them.



Question is if finnaly work CP09 on factory mode or not?



make backup from both ECU and clone it on factory mode and let us know if works.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. BMW DDE EDC17CP09 cloning issues