1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Hextag / Hexprog features request
AdvancedCar
2022-05-20T02:43:04Z
Can VAG SIMOS 8.2x be added ?

This ECU I think can be read only in Boot mode , and I was able to read it with Menu of SIMOS 8.3 boot mode , P flash seam to be good , but Ex eprom read all 00000000000000. So it does not read Ex Eeprom under this menu.
Here is the boot mode connection, Very similar as Simos 8.3 and 12v, ground Can -H and Can_L is same as all other Simos 8.3,8.4,8.5
CNF is Purple Signal wire .

Simos 8.2x Boot mode
Best tool ever " Brain.exe "
Autohex_II_BMW
2022-05-21T06:08:30Z
thank you for the feedback we will look into it and will try to add the ecu.
sagishm
2022-08-13T06:44:27Z
Originally Posted by: brad_system 

my 2 cents..

- possibility to save ecu Identification (hw, sw, vin, ...) via CTRL-C or save to text file..

- possibility to disable voltage check in obd mode, most cars with 12V on battery are able to handle 1-4min flashing..



thx brad



Originally Posted by: Autohex_II_BMW 

Originally Posted by: brad_system 

my 2 cents..

- possibility to save ecu Identification (hw, sw, vin, ...) via CTRL-C or save to text file..

- possibility to disable voltage check in obd mode, most cars with 12V on battery are able to handle 1-4min flashing..



thx brad



For ECU SW identification we will look into it in future but for OBD voltage disable we cannot do we its effects security. Initially we did not made this restriction but ECU was failing while writing flash because of no proper voltage so only after that we made the restriction due to safety purposes.


I talked about that feature before one year ago, they declined, this why I don’t buy the flashing license after 3 months free.
Im mobile tuner and lot of time i cant connect battery stabilizer, i know about restrictions and i know when is not safe.
Give us the option to disable that, we aware about that and once we disable that we know we are not in safe place.
From my opinion it’s same like checksum disable, if you disable that without knowing what you do you will break the ecu.
brad_system
2022-10-01T19:51:48Z
sagishm: iv made "voltage check bypass device" hexprog always think its 13.3V - its silly solution but it works..
used voltage dc dc step up regulator: LM2596
from ali for 1usd..
bypass


also its sad theres still not possible to save ecu info in text file and backup dont offer to save separate files.
sagishm
2022-12-12T21:53:36Z
Where did you get the obd box?

But just say again, give us the option to disable that limit, there is option to sting that, we know the restrictions, you can do that in one line.
sagishm
2022-12-12T21:55:03Z
Where did you get the obd box?

But just say again, give us the option to disable that limit, there is option to
Infamous
2022-12-21T14:05:15Z
How about the ability's to know what type of ecu to look for to begin with...you cant look up car year make model or engine size at all in software...
also would be nice to add the ford with ecu EEC-V, EEC VI type..
Autohex_II_BMW
2022-12-22T12:32:23Z
Voltage checking disabled will result in ECU flashing failure often. Anyway, we will look into it. For ECU selection it is possible to search with Bosch part number and also ecu name search option. So it can search like that.
sagishm
2022-12-25T14:25:22Z
Originally Posted by: Autohex_II_BMW 

Voltage checking disabled will result in ECU flashing failure often. Anyway, we will look into it. For ECU selection it is possible to search with Bosch part number and also ecu name search option. So it can search like that.



every one with that job know that, give us the option to decide, popup with warning when that disabled will be enough.
thanks!
AdvancedCar
2023-01-06T23:03:06Z
Is it Possible to add for BMW F Series to add/modified VIN when read 160D0WQ/160D0WT and 95320?
Best tool ever " Brain.exe "
BobbySD
2023-01-07T08:25:25Z
hey, I would like to ask about possible support of hextag for r/w PSA DCM7.1A? And when it can be if it will?

Thanks!
Autohex_II_BMW
2023-01-07T13:46:14Z
For now, vin can be edited with the help of the support team from file for 160 and 95320 EEPROMs. Please contact support to help.
DCM7.1 is not supported and doesn't have a forecast now. But our development team is working on this ECU. Hopefully, we will have this soon.
BobbySD
2023-01-15T16:38:18Z
and what about delphi etc3? is this in plan? in general i would like to see more truck ecus inside hexprog. there are just few of them...
Autohex_II_BMW
2023-01-16T08:39:24Z
We have plans to add more truck ECUs, we will be working on those soon.
sagishm
2023-02-18T07:21:40Z
What about the option to remove limitation of 13v?
You will add option to disable that or not?
Thanks
Autohex_II_BMW
2023-02-18T14:38:30Z
Hi
yes , we have plans to adding allow customers to uncheck the voltage value by software obd. It will be in future updates
AdvancedCar
2023-06-08T18:37:19Z
Hi,
What about Adding in AUDI 6hp an 8hp TCU read?
I am sure this will be easy to add since you have it in BMW menu , but not sure will BMW menu work to read/write those transmission as they have 6hp28 and 8hp55 which BMW menu do not have it .
Here is the some info about 8hp:
https://en.wikipedia.org/wiki/ZF_8HP_transmission 


Thank you
Best tool ever " Brain.exe "
Autohex_II_BMW
2023-06-09T08:35:29Z
Thank you for the above info
we will check and try to add more TCU including ZF from VAG group
oalleyne
2023-06-29T17:01:36Z
Any plans for adding hitachi SH705x for gasoline vehicles for instance Nissan K-Line? or Even JTAG to these ecus?
jokir
2023-06-30T14:11:53Z
I would also like to be able to read VAG Delphi DCM6.2 in boot mode, repair VAG EDC16 via OBD and repair VAG DQ500 via Boot mode.
Similar Topics
Users browsing this topic
  1. Microtronik Autohex II and Hexprog forum
  2. HexProg Programming Tool
  3. HexProg Intro
  4. Hextag / Hexprog features request