Hi,
There is a problem when you try to write P Flash to Simos 12 VAG , It does not write one area where is Immobilizer data is MAC 1.
I contact support back in December and report this problem and till this day it has not been solved.
This ECU has Immobilizer data in Eeprom and MAC1 in Flash so when you transfer Immo data from one ECU to other Both has to be write Flash and Eeprom (P Flash and D flash)
D flash writes Ok m but P flash never write this area which is in line 0x001150.
When I find out this in December , I went to local guy and use FLEX and FLEX write this are with out any problem, So this area CAN BE WRITE and there is no checksum in this area.
I had to use him every time I have this ECU and of Course I have to pay him for this and that is not good thing having my own tool I have to pay someone to do this for me.
I attached picture after Write P Flash to donor ECU, In picture you can see donor and original ECU and you can see in Donor ECU this was NOT written , same data as before .
Again This area has MAC1 and has to be able to Write this area .
Please can this be fixed ASAP. I think over 5 moths is very long time for this to not be fixed.
Edited by user
2023-05-10T03:00:27Z
|
Reason: Not specified
Best tool ever " Brain.exe "